value: Enter a value. The LUT will be calculated and downloaded to the camera.
Region LUT
Both LUT can be configured with ROI vlaues. The LUT is only working inside the the ROI values.
Overlapping is possible. LUT0 has higher priority.
Enable Region LUT: Enable the region LUT functionality.
Region of LUT:
X: X - coordinate of region LUT, starting from 0 in the upper left corner.
Y: Y - coordinate of region LUT, starting from 0 in the upper left corner.
W: Region LUT window width (in steps of 2 pixel).
H: Region LUT window height.
Set to max ROI: Set Region LUT window to maximal ROI (X=0; Y=0; W=1024; H=1024).
LUT Files
To load or save a LUT file
LUT Index: Select the LUT, you want to load or save a file.
File functions:
Load File...: Load a user defined LUT - file into the camera (*.txt tab delimited). There is an
example file (mv1_d1024e_160_lut.txt) in the directory LUT-files located in the PFRemote
installation directory.
Save File...: Save LUT from camera into a file.
MAN064 02/2020 V1.1
8.1 MV1-D1024E-160
87 of 109