Rain Master RME EAGLE User Manual page 98

Rain Master Irrigation Systems
7.4 ENTERING HISTORICAL ET MONTHLY VALUES
The Historical ET Monthly values are determined based on the location of your controller. The
monthly values represent data that has been averaged over several years on a site specific basis.
The entered data is the average daily ET (measured in inches) for each specific month. Refer to
section 8.2 OBTAINING THE HISTORICAL ET DATA.
The monthly historical values are entered once during initial configuration of the controller and as
long as the controller is not relocated, the values will not need to be changed.
The RME EAGLE controller uses these values during runtime calculations to average the increase
or decrease in the watering time based on seasonal changes.
EXAMPLE: Enter a Monthly ET value for June of .18 and for July of .19.
Continue to Press:
Press:
SUN
1
ET
Press:
Press:
SUN
1
QUIT
Press:
The controller will return to Automatic Mode.
Chapter 7 ET Key Operations
ET
ENTER
8
Display will indicate:
ENTER
9
Until display indicates:
Display will indicate:
ETJUL .10
PROGRAM
Display will indicate:
RME EAGLE User Manual
ETJUN .10
PROGRAM
ETJUN .18
PROGRAM
ETJUL .19
PROGRAM
Page 91