Rain Master RME EAGLE User Manual page 128

Rain Master Irrigation Systems
FLOW ON
PROGRAM
PIPE 1.00
PROGRAM
PIPE 3.00
PROGRAM
MAIN 500
PROGRAM
UNSCH200
PROGRAM
FDELAY 3
PROGRAM
TOTAL
PROGRAM
PERCNT 20
PROGRAM
LIMIT 500
PROGRAM
Appendix A Controller Displays
FLOW OFF
PROGRAM
PIPE 1.25
PROGRAM
PIPE 4.00
PROGRAM
= Set Main Line Flow limits, in gallons-per-minute (GPM).
= Set Unscheduled Flow Limits, in gallons-per-minute (GPM).
= Set a Flow Check Delay time, before the flow reading is
analyzed, in minutes.
GALLONS
PROGRAM PROGRAM
= Select a tolerance percentage adjustment for all stations Upper
Flow Limits. This feature provides a tolerance for variation in
water pressure.
= Select the stations Upper Flow Limits, in Gallons-Per-Minute
(GPM).
= Enable/Disable Flow monitoring
features.
PIPE 1.50
PROGRAM
PIPEOTHR
PROGRAM
=
12345
RME EAGLE User Manual
PIPE 2.00
PROGRAM
= Select Flow
monitoring Pipe
size. Selection of
a pipe size is
required for
accurate
monitoring of
water flow.
The Total Gallons of
water used since the
controller was cleared.
The display will indicate
"TOTAL", then
"GALLONS", then the
actual gallons number.
Page 121