Rain Master RME EAGLE User Manual page 100

Rain Master Irrigation Systems
QUIT
Press:
The controller will return to the Automatic Mode.
EXAMPLE: Review Status of the Weather Station Device.
Continue to Press:
Press:
QUIT
The controller will return to Automatic Mode.
7.5.1 Weather Station Status Display
Once the Weather Station device has been enabled (DVICE ON), the next ET parameter display
will be the current day's accumulated values received from a Weather Station interface. The
Weather Station status display will provide the total number of counts received since last midnight.
Current day accumulation will complete at midnight and will then be used in tomorrow's
calculation of station watering time.
NOTE:
NOTE:
The display indicates the total ET (measured in inches) accumulated since midnight.
EXAMPLE: Review today's Weather Station accumulated ET.
Continue to Press:
NOTE:
Chapter 7 ET Key Operations
ET
The accumulated Weather Station count will only be valid and used, after a
complete 24 hour accumulation period (midnight to midnight). The value
will then be used for all next day and future day calculations.
If controller power is lost for more then one hour, the Weather Station
count will be invalidated and the controller will store and use Historical ET
data for the current day accumulation.
ET
The Weather Station Device Status display will not be presented if the
Weather Station Device has not been enabled.
Until display indicates:
Until display indicates:
RME EAGLE User Manual
DVICE ON
PROGRAM
DCNT .18
PROGRAM
Page 93