Rain Master RME EAGLE User Manual page 125

RME EAGLE User Manual
2 PT-124
PROGRAM
2 ET-085
PROGRAM
STATIONS
PROGRAM
RUN TIME
PROGRAM
2 02-0:19
PROGRAM
MAX TIME
PROGRAM
2 02-4:00
PROGRAM
SOAKTIME
PROGRAM
Page 118
= If the irrigation program is a conventional program the Water
Percentage Budget value is displayed. This example indicates
that the base watering time will be increased by 24%.
= If the irrigation program is an ET based program the ET
Percentage Adjust value is displayed. This example indicates
that the each station runtime will be decreased by 15%.
= The controller displays the selected stations and their
associated water run lengths, on a per program basis.
Depression of the REVIEW key will display the prompt
STATIONS.
= The next depression of the REVIEW key will display the
prompt RUNTIME.
= The next depression of the REVIEW key will display the
irrigation program number, the station number and the
watering time in hours and minutes. The controller will repeat
the display cycle for each configured station.
= If the irrigation program is a Cycle and Soak irrigation
method, then the MAXTIME or the time the valve is on,
prompt will be displayed.
= The controller automatically rotates to the display of the
maximum runtime. The irrigation program number, the
station number involved and the watering time in hours and
minutes are displayed.
= If the irrigation program is a Cycle and Soak irrigation
method, then the SOAKTIME or the time the valve will be
off, prompt will be displayed.
Rain Master Irrigation Systems
Appendix A Controller Displays