Rain Master RME EAGLE User Manual page 126

Rain Master Irrigation Systems
2 02-0:00
PROGRAM
A.1.11 SETUP Prompts and Displays
SETTIME
PROGRAM
5:30PM
PROGRAM
SET DATE
PROGRAM
MMDDYY
PROGRAM
MV 1234
PROGRAM
TYPE - NC
PROGRAM
PUMP 1234
PROGRAM
STACK
PROGRAM
Appendix A Controller Displays
= The controller automatically rotates to the display of the
minimum soak time or none. The irrigation program number,
the station number involved and the watering time in hours
and minutes are displayed.
= Set the Time-of-Day, the controller will prompt for the SET
TIME when no valid time has been previous entered.
= Set the Time-of-Day, controller uses 12 hour clock format, the
keyboard contains an AM/PM toggle key.
= Set the current Date, the controller will prompt for the SET
DATE and then display the required format.
= The controller will display this prompt after the SETDATE is
displayed to indicate the required format of the entry.
= Enable/Disable use of the Master Valve on a per program
basis.
= Select the type of Master valve to be used.
Where:
NC = Normally Closed Master Valve
NO = Normally Open Master Valve
= Enable/Disable use of a Pump on a per program basis.
= Select irrigation program Stack Mode. Stack Mode will
sequentially run each program one after the other.
RME EAGLE User Manual
Page 119