Rain Master RME EAGLE User Manual page 108

Rain Master Irrigation Systems
1. Historical ET
2. Manually Entered ET
3. Weather Station generated ET
4. ET data provided via the Internet
To view what data source the RME EAGLE controller is currently using, do the following:
EXAMPLE: Display the current ET value used for today's ET runtime calculation.
Press:
ET
Display indicates:
PROGRAM
Display indicates:
PROGRAM
Display indicates:
PROGRAM
Display indicates:
PROGRAM
QUIT
Press:
The controller will return to the Automatic Mode.
8.6.1 Historical ET
Historical ET data is the default source for ET calculations. Refer to sections 8.2 OBTAINING
THE HISTORICAL ET DATA and 7.4 ENTERING HISTORICAL ET MONTHLY VALUES to
determine how to obtain and enter the Historical ET data into your controller.
Once you have enabled a program for ET operation, see section 7.2 ET MODE, the controller will
use this data source until another ET data source is selected.
Chapter 8 ET Programming
ET – H .18
ET – M .13
ET – D .22
ET – I .11
= This display indicates that the Data Source is
Historical (H) ET Data.
= This display indicates that the Data Source is
Manually (M) Entered ET Data.
= This display indicates that the Data Source is
a Weather Station Device (D).
= This display indicates that the Data Source is
Internet (I) provided ET Data.
RME EAGLE User Manual
Page 101