Rain Master RME EAGLE User Manual page 82

Rain Master Irrigation Systems
Display will indicate:
QUIT
Press:
The controller will return to the Automatic Mode.
6.13.1 Pipe
In order to properly measure flow, the pipe size of the Rain Master Flow Sensor must be specified.
Appendix B lists flow sensor part numbers and their associated pipe size.
You can select the following pipe sizes in inches: 1.00, 1.25, 1.50, 2.00, 3.00, 4.00 and OTHR.
Each depression of the 1 key will toggle the display to the next pipe size. (Selection of OTHR is
reserved for future use.) When you have reached the pipe size you want to select, press ENTER.
NOTE:
EXAMPLE: Select a pipe size of 3.00 inches.
Continue to Press:
Press:
SUN
1
Display will indicate:
QUIT
Press:
The controller will return to the Automatic Mode.
Chapter 6 Setup Key Operations
FLOW ON
PROGRAM
This SETUP function will be skipped if you have not enabled the flow
features.
SETUP
ENTER
SUN
1
PIPE 3.00
PROGRAM
Until display indicates: CODE
The 1 key acts as a toggle key when used in
this SETUP configuration item.
RME EAGLE User Manual
PIPE 1.50
PROGRAM
Page 75