Rain Master RME EAGLE User Manual page 77

RME EAGLE User Manual
SNSR-WET
PROGRAM
If the sensor condition is Dry, the irrigation program(s) will operate normally. If the sensor
condition is Wet, no irrigation will take place on those configured program(s).
Additionally, when a program is scheduled to operate, an asterisk will appear in the leftmost
location in the display, if the external sensor has detected rain, or the external switch is Open.
r
04:30
PROGRAM
NOTE:
EXAMPLE: To configure Program 4 for Sensor Mode,
Continue to Press:
WED
Press:
4
Display will indicate:
QUIT
Press:
The controller will return to the Automatic Mode.
Page 70
Or
SNSR-DRY
PROGRAM
The external sensor is independent of the Rain Switch on the front of
the controller. Leave the front panel Rain Switch in the Automatic
Watering position.
SETUP
ENTER
SNSR1234
PROGRAM
Until display indicates: CODE
Chapter 6 Setup Key Operations
Rain Master Irrigation Systems
SNSR 123
PROGRAM