Rain Master RME EAGLE User Manual page 122

Rain Master Irrigation Systems
A.1.7 START TIMES Prompts and Displays
START
PROGRAM
TIME 2
PROGRAM
2 1:30PM
PROGRAM
A.1.8 QUICK STATIONS Prompts and Displays
2 PT-100
PROGRAM
2 LO- 14
PROGRAM
2 HI- 23
PROGRAM
2 LN- 0:15
PROGRAM
Appendix A Controller Displays
= When entering Start Times for a given irrigation program the
controller will prompt the operator by first displaying START.
= Then the Start Time number to be entered or modified. The
controller supports five start times per irrigation program.
= Then the irrigation program number, followed by the actual
start time.
3 ET-125
PROGRAM
= Prompts you to enter the lowest or starting station number, for
each irrigation program. In this example irrigation program
two (2) and starting with station number fourteen (14).
= Prompts you to enter the highest or final station number, for
each irrigation program. In this example irrigation program
two (2) and ending with station number twenty-three (23).
= Prompts you to enter the watering time (runtime) of all
stations selected in the previous two prompts. In this
example, irrigation program two (2), will have a watering time
of fifteen (15 minutes) per station.
= If the irrigation program is a
conventional program the Water
Percentage Budget value is briefly
displayed.
If the irrigation program is an ET based
program the ET Percentage Adjust
value is briefly displayed.
RME EAGLE User Manual
Page 115