Rain Master RME EAGLE User Manual page 130

Rain Master Irrigation Systems
A.1.14 CLEAR Prompts and Displays
OFF -
PROGRAM
RAIN 1
PROGRAM
A.1.15 Flow Sensor Prompts and Displays
FLOW STA
PROGRAM
FLOW UN
PROGRAM
FLOWMAIN
PROGRAM
A.1.16 Miscellaneous Prompts and Displays
1 1:36:09
PROGRAM
LOCKED
PROGRAM
Appendix A Controller Displays
= The controller program or function has been interrupted by the
operator pressing CLEAR.
= Irrigation Program one is in Rain Shut-down Mode.
= Shown when REVIEW is pressed during a fault condition and
the problem is a station upper flow limit violation. The faulty
station(s) will be shown in the LED lights. Subsequent press
of the REVIEW key shows the measured flow in GPM at the
time the fault was detected.
RA I N -N
= Shown when REVIEW is pressed during a fault condition and
the problem is an unscheduled flow limit violation.
Subsequent presses of the REVIEW key shows the measured
flow in GPM at the time the fault was detected.
= Shown when REVIEW is pressed during a fault condition and
the problem is a main line flow limit violation. Subsequent
presses of the REVIEW key shows the measured flow in GPM
at the time the fault was detected.
= Automatic program count down display. The controller is
executing irrigation program number one and there is 1 hour,
36 minutes and 09 seconds before the program is complete.
The controller will count down to zero then return to
Automatic Mode.
= A security code has been entered and enabled. To access the
controller's functions will require reentry of the access code.
RME EAGLE User Manual
Page 123