Rain Master RME EAGLE User Manual page 120

Rain Master Irrigation Systems
ETAUG .36
PROGRAM
ETSEP .31
PROGRAM
ETOCT .33
PROGRAM
ETNOV .29
PROGRAM
ETDEC .35
PROGRAM
DVICE ON
PROGRAM
DCNT .29
PROGRAM
A.1.4 PROGRAM Prompts and Displays
PROG-1
PROGRAM
PROG-2
PROGRAM
PROG-3
PROGRAM
PROG-4
PROGRAM
Appendix A Controller Displays
= Display or enter the Historical ET month of August value.
The value is used in all subsequent irrigation calculations.
= Display or enter the Historical ET month of September value.
The value is used in all subsequent irrigation calculations.
= Display or enter the Historical ET month of October value.
The value is used in all subsequent irrigation calculations.
= Display or enter the Historical ET month of November value.
The value is used in all subsequent irrigation calculations.
= Display or enter the Historical ET month of December value.
The value is used in all subsequent irrigation calculations.
DVICE OFF
=
PROGRAM
= If device is enabled, display the current accumulated value of
ET data. This value will be used in tomorrow's calculations
and the total accumulation will be stored at midnight.
= Select Program One (1) for programming, modification or
review.
= Select Program Two (2) for programming, modification or
review.
= Select Program Three (3) for programming, modification or
review.
= Select Program Four (4) for programming, modification or
review.
Enable/Disable the ET Weather Station device.
RME EAGLE User Manual
Page 113