Rain Master RME EAGLE User Manual page 131

RME EAGLE User Manual
NO
PROGRAM
RAIN OFF
PROGRAM
OK
PROGRAM
01:32
PROGRAM
04:23
PROGRAM
CHECK
PROGRAM
WAIT
PROGRAM
FAULT
PROGRAM
Page 124
= The controller is indicating that you have entered invalid data
or an out of range value.
= The entire controller is in Rain Shut-off Mode.
= Okay, indicates an acceptance of an option or a data value.
= A program is running in the automatic mode but no stations
are watering because ODD/EVEN watering schedule is
enabled and an ODD or EVEN day exists.
= A program is running in the automatic mode but no stations
are watering because the rain sensor is enabled and a wet
condition exists.
= In Manual System Check/Syringe Cycle and the flow sensor
features are not enabled.
= Flashes at about 1 second rate during power up (only if power
up takes a long time; power up usually takes several seconds
but under very unusual circumstances can take several
minutes).
PRESS
PROGRAM PROGRAM
=
REVIEW
Appendix A Controller Displays
Rain Master Irrigation Systems
Either an over-current or
short circuit has occurred
on one or more stations,
field wires or valve
solenoids OR a flow
limit violation has
occurred. Press
REVIEW for more
information.