Rain Master RME EAGLE User Manual page 97

RME EAGLE User Manual
NOTE:
The controller will return to the Automatic Mode.
7.3 ENTERING THE ET REFERENCE VALUE
The ET Reference value is an important parameter, required by the controller, in order to realize ET
water savings. Please refer to section 8.4 ESTABLISH THE ET REFERENCE VALUE to
determine how this value is derived. The reference value (measured in inches) closely coincides
with the reference program defined in section 8.3 GENERATE THE REFERENCE PROGRAM.
EXAMPLE: Enter an ET Reference value of .13,
Continue to Press:
SUN
Press:
1 3
QUIT
Press:
The controller will return to Automatic Mode.
EXAMPLE: Review the ET Reference value,
Continue to Press:
ET
Press:
QUIT
Press:
The controller will return to Automatic Mode.
Page 90
The RME EAGLE controller allows the four programs to be ET based
programs, conventional irrigation programs, or any combination of the two
program types.
ET
TUE
ENTER
ET
To review the Monthly ET value for January,
Until display indicates:
Display will indicate:
Until display indicates:
Rain Master Irrigation Systems
ETREF
PROGRAM
ETREF .13
PROGRAM
ETREF .13
PROGRAM
Chapter 7 ET Key Operations