Specifications - Takex PIR-T40NAM Instruction Manual

11

SPECIFICATIONS

Model
Model number
Detection system
Detection area
wer supply
Po
Current consumption
Alarm output
External output
Tamper output
Anti-masking output
Alarm LED
Memory LED
Functions
Mounting height
Area angle adjustment range
Ambient temperature range
Mounting position
IP rating
Connections
Weight
Appearance
Vertical curtain protection
Detection distance : Max 150' (45m), 46 rays (23 pairs)
9 to 28V DC (non-polarity)
Max. 50mA
Contact method : Dry semi-conductor contact, N.C./N.O. selectable
Contact operation : One-shot operation when detecting intrusion
Continuous output in the event of cover monitor error
Continuous output in the event of alignment position error
Continuous output in the event of self diagnosis error
Continuous output in the event of power voltage error
Contact rating : 24V (AC/DC) 0.25A (resistive load)
(built-in contact protective resistor 3.3Ω)
Contact method : Dry semi-conductor contact N.O.
Contact operation : One-shot operation / Off delay operation selectable when
detecting intrusion
Contact rating : 24V (AC/DC) 0.25A (resistive load)
(built-in contact protective resistor 3.3Ω)
: Dry mechanical contact, N.C.
Contact method
: Continuous output
Contact operation
: 24V (AC/DC) 0.1A (resistive load)
Contact rating
(built-in contact protective resistor 3.3Ω)
Contact method : Dry semi-conductor contact N.C.
Contact operation : Continuosly output when an object is
placed in front of the lens (until nomal recovery)
Contact rating : 24V (AC/DC) 0.25A (resistive load)
(built-in contact protective resistor 3.3Ω)
Red LED : Blinks* during warm up
Lights up* when detecting intrusion
Continuously blinks in the event of cover monitor error
Continuously lit in the event of alignment position error
Continuously blinks in the event of self diagnosis error
Continuously lit in the event of power voltage error
Continuously blinks in the event of Anti-masking error
(* ON/OFF selectable using the mode selector)
: Blinks for 3 minutes during memory display, Auto reset operation either
Red LED
of continuous lighting for 47 minutes or blinking for 50 minutes selectable
(Blinks to lights / blinks, ON/OFF selectable using the mode selector)
Sensitivity selection
Operation mode selection
Alarm memory LED
Self diagnosis
Low voltage monitoring
Temperature compensation
Front & back tamper
LED area checker
Environmental adjustment
Creep zone detection
Walk test mode
Near area cancellation
Anti-masking
6.6' to 20' (2.0 to 6.0m) (varies depending on the operation mode)
• Low position mode : 6.6' to 8.3' (2.0 to 2.5m) （Maximum detection distance：135'
• Middel position mode : 8.3' to 11.5' (2.5 to 3.5m) （Maximum detection distance：115'
• High position mode : 11.5' to 13' (3.5 to 4.0m) （Maximum detection distance：100'
• High density mode : 6.6' to 20' (2.0 to 6.0m)
Horizontal direction : ±90° (in 5° steps)
Vertical direction : 17° (no stage adjustment)
-25 to +55˚C (no condensation and freezing)
Indoor / outdoor wall surface
* Can be mounted on poles and ceilings (or under eaves) using optional accessories
IP55
Terminals (M2.6 self up terminal)
Approx. 600g
Body : Resin (white), Window : Resin (white)
⑪
Triple mirror passive sensor
PIR-T40NAM (W)
Passive infrared
（Maximum detection distance：150'
(40ｍ)）
(35ｍ)）
(30ｍ)）
(45ｍ)）