Download Print this page

External Dimensions; Specifications - Takex FS-1000E Instruction Manual

Flame sensor

Advertisement

When detector elements are
stained, spray alcohol to the
elements and remove the stain.
Do not use such chemicals as
mild detergent, thinner or benzine
to clean the detector elements.
When housing is stained, clean it
with a soft cloth.
10

SPECIFICATIONS

Model No.
FS-1000E
Ultraviolet rays detection
Detection system
(Detected wave length 180 to 260nm)
Detection distance
33ft. (10m) [2.75" (7cm) lighter flame, in front]
Detection sensitivity (H [100%], L [50%])
Sensitivity adjustment
Detection timer (1sec., 6sec., 15sec., 30sec.)
Type-AA alkaline battery(
Power supply
External power supply 9 to 30V DC with polarity
Stand by : 50μA Max. using battery power supply
Power consumption
Alarm
Indication : Red LED
LED
Alarm : Flashing every 0.2sec. during off-delay 10sec.
Low battery : Light on 0.1sec. every approx. 5sec.
Alarm : Sounds intermittently every 0.2sec. during off-delay 10sec.
Low battery : Sounds 0.1sec. intermittently every approx. 5sec.
Buzzer
Volume : 80dB or more 3.3ft. (1m) ahead
(Silent setting is available by cutting internal jumper line)
NPN open collector output
External output
(Useful as an output with voltage when extrnal power is used)
30V DC 50mA offdelay 10sec. continuous output
Wiring
Terminals
+14°F to +140°F (-10°C to +60°C) without condensation
Ambient temp.
Battry performance may decrease under +32°F (0°C)
renge
or beyond +104°F (+40°C)
Installation
Indoor (ceiling or wall mount)
Approx. 7oz (200g)
Weight
including battery (accessory) 1.8oz (50g)

External dimensions

φ4.72" (120mm)
Appearance
ABS resin (white)
Battery case for type-3
Type-AA alkaline battery LR-6
Accessories
Sensor locking screw φ3
Tapping screw φ4
Ceiling/wall mount attachment BCW-401
Option
(variable attachment)
In Japan
Takenaka Engineering Co., Ltd.
83-1, Gojo-sotokan, Higashino,
Yamashina-ku, Kyoto 607-8156, Japan
Tel : 81-75-501-6651
Fax : 81-75-593-3816
http : // www. takex-eng. co. jp /
detector 
elements
alcohol
not included)
5mA Max. using external power supply
: 50mA Max. when buzzer sounds
( Excluding the current draw for power
output through terminal (3) & (4) )
H 1.58" (40mm)
×
2pcs,
1
×
×
2
×
6,
1
×
×
25,
2
×
×
In the U.S.
Takex America Inc.
3350, Montgomery Drive
Sant Clara, CA 95054, U.S.A.
Tel : 408-747-0100
Fax : 408-734-1100
http : // www. takex. com
11
EXTERNAL DIMENSIONS
φ 4.72" (φ 120mm)
φ 3.88" (φ 98.5mm)
Release lever
Locking
screw hole
LED (Red)
■OPTION
◎Ceiling/wall mount attachment
(variable attachment)
Limited Warranty :
TAKEX products are warranted to be free from defects in material and
workmanship for 12 months from original date of shipment. Our warranty
does not cover damage or failure caused by Acts of God (including inductive
surge by lightning), abuse, misuse, abnormal usage, faulty installation,
improper maintenance or any repairs other than those provided by TAKEX.
All implied warranties with respect to TAKEX, including implied warranties
for merchantability and implied warranties for tness, are limited in duration
to 12 months from original date of shipment. During the Warranty Period,
TAKEX will repair or replace, at its sole option, free of charge, any defective
parts returned prepaid. Please provide the model number of the products,
original date of shipment and nature of dif culty being experienced. There will
be charges rendered for product repairs made after our Warranty period has
expired.
In Australia
In the U.K.
Takex America Inc.
Takex Europe Ltd.
4/15 Howleys Road, Notting Hill,
Takex House, Aviary Court, Wade Road,
VIC, 3168
Basingstoke, Hampshire. RG24 8PE, U.K.
Tel : (+ 44 ) 01256-475555
Tel : +61 (03) 9544-2477
Fax : +61 (03) 9543-2342
Fax : (+ 44 ) 01256-466268
http : // www. takexeurope. com
Base unit
Sensor unit
Buzzer
(built in)
5- φ 0.17"
(5- φ 4.2mm)
Wiring hole
2.63"
Detection window
( 66.7mm)
φ 3.29"
R0.59"
(φ 83.5mm)
(R15mm)
MOUNT & WIRING HOLE
〔BCW-401〕
No.05-785
φ 0.35"
(φ 9mm)
1406

Advertisement

loading