Auto Setup - Yamaha DSP-AX463 Owner's Manual

Yamaha av amplifier owner's manual
Hide thumbs Also See for DSP-AX463:
Table of Contents

Advertisement

■ AUTO SETUP

Before AUTO SETUP
Error message
Connect MIC!
Unplug HP!
During AUTO SETUP
Error message
E-1:NO FRONT SP
E-2:NO SUR.SP
E-4:NOISY
E-6:NO MIC
E-7:NO SIGNAL
E-8:USER CANCEL
E-9:INTERNAL ERROR
Cause
Optimizer microphone is not connected.
Headphones are connected.
Cause
Front L/R channel signals are not detected.
A surround channel signal is not detected.
Background noise is too loud.
The optimizer microphone was unplugged
during the "AUTO SETUP" procedure.
The optimizer microphone does not detect
test tones.
The "AUTO SETUP" procedure was
cancelled due to user activity.
An internal error occurred.
Remedy
Connect the supplied optimizer microphone
to the OPTIMIZER MIC jack on the front
panel.
Unplug the headphones.
Remedy
Check the front L/R speaker connections.
Check the surround speaker connections.
Try running "AUTO SETUP" in a quiet
environment.
Turn off noisy electric equipment like air
conditioners or move them away from the
optimizer microphone.
Connect the supplied optimizer microphone
to OPTIMIZER MIC jack on the front
panel.
Check the microphone setting.
Check the speaker connections and
placement.
Run "AUTO SETUP" again.
Run "AUTO SETUP" again.
Troubleshooting
See
page
23
See
page
11
11
23
23
10, 11,
23
23
23
67
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsp-ax563

Table of Contents