Other Functions; Turning Off The Unit Automatically (Auto-Standby Function); Dimming The Power Indicator - Yamaha MX-A5200 Owner's Manual

Other functions

Turning off the unit automatically
(auto-standby function)
The unit will automatically go into standby mode 8 hours after the unit is turned on.
To disable the auto-standby function, set the AUTO POWER STANDBY switch to "OFF".
• The auto-standby function works even if playback is ongoing.
• When the system control cable is connected to the TRIGGER IN jack, the auto-standby function does not work
even if it is enabled.

Dimming the power indicator

You can dim the power indicator on the front panel of the unit.
• When an external device is connected to the TRIGGER IN jack, turn on it before performing the following
procedure.
a If the unit is turned on, press z (power) to turn off it.
b Press z (power) three times within 3 seconds.
The power indicator dims.
• To cancel the dimmer, perform the procedure again.
• If the power cable is unplugged, the dimmer will be canceled.
17
Other functions
En