Step 3: Press SCENE 1 button
Turn on the video monitor and then set the
input source selector of the video monitor to
Press B SCENE 1.
This unit is turned on. "DVD Viewing" appears in the
front panel display, and this unit automatically
optimize own status for the DVD playback.
The indicator on the selected SCENE button lights up while
this unit is in the SCENE mode.
Start playback of the desired DVD on your
Rotate D VOLUME to adjust the volume.
When you change the input source or sound field program, the
SCENE mode is deactivated.
■ About SCENE function
Just by pressing one SCENE button, you can turn on this
unit and recall your favorite input source and sound field
program according to the SCENE template that has been
assigned to the SCENE button. The SCENE templates are
built combinations of input sources and sound field
If you connect a Yamaha product that has capability of the
SCENE control signals, this unit can automatically activate the
component and start playback. Refer to the instruction manual of
the DVD player for further information.
■ The default assigned SCENE templates
The name of the SCENE template
and its description
DVD Movie Viewing
– input source: DVD
– sound field program: Movie Dramatic
For when you want to enjoy a movie from the
connected DVD player.
Music Disc Listening
– input source: DVD
– sound field program: 2ch Stereo
For when you want to listen to a music disc from
the connected DVD player.
– input source: DTV/CBL
– sound field program: STRAIGHT
For when you want to watch a TV program.
– input source: TUNER
– sound field program: 5ch Enhancer
For when you want to listen to a music program
from the FM radio station.
You must connect a cable TV or a satellite tuner to this unit in
advance. See page 17 for details.
You must connect a FM/AM/DAB tuner to this unit in advance.
See page 18 for details.
You can change the assigned SCENE template for the SCENE
buttons. See page 27 for details.
Quick start guide