Using The Remote Control - Yamaha DSP-AX463 Owner's Manual

Yamaha av amplifier owner's manual
Hide thumbs Also See for DSP-AX463:
Table of Contents

Advertisement

Connections
A CINEMA DSP indicator
Lights up when you select a CINEMA DSP sound
field program (see page 38).
VIRTUAL indicator
Lights up when Virtual CINEMA DSP is active (see
page 38).
SILENT CINEMA indicator
Lights up when headphones are connected and a
sound field program is selected (see page 38).
B Multi-information display
Shows the name of the current sound field program and
other information when adjusting or changing settings.
C SLEEP indicator
Lights up while the sleep timer is on (see page 36).
D Input channel and speaker indicators
LFE indicator
LFE
L L C R
Input channel indicators
SL
SR
Input channel indicators
• Indicate the channel components of the current
digital input signal.
• Light up or flash according to the settings of the
speakers when this unit is in the automatic setup
procedure (see page 23) or the speaker level setting
procedure in the "SP LEVEL" (see page 52).
22
En

■ Using the remote control

The remote control transmits a directional infrared ray.
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.
Approximately 6 m
1 Infrared window
Outputs infrared control signals. Aim this window at the
component you want to operate.
y
To set the remote control codes for other components, see
page 62.
Notes
• Do not spill water or other liquids on the remote control.
• Do not drop the remote control.
• Do not leave or store the remote control in the following types
of conditions:
– places of high humidity, such as near a bath
– places of high temperature, such as near a heater or stove
– places of extremely low temperatures
– dusty places
30º
30º

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dsp-ax563

Table of Contents