What Do You Want To Do With This Unit - Yamaha DSP-AX463 Owner's Manual

Quick start guide
■ After using this unit...
Press A STANDBY/ON on the front panel to set
this unit to the standby mode.
This unit is set to the standby mode. In the standby mode,
this unit consumes a small amount of power in order to
receive infrared signals from the remote control. To turn
on this unit from the standby mode, press A STANDBY/
ON (or GPOWER). See page 20 for details.
8
En
What do you want to do with this
unit?
■ Customizing the SCENE templates
• Using various SCENE templates
• Creating your original SCENE templates
■ Using various input sources
• Basic controls of this unit
• Using your USB portable device
with this unit
• Using your iPod with this unit
• Using your Bluetooth components
with this unit
■ Using various sound features
• Using various sound field programs
• Using the direct mode for the high
quality sound
• Customizing the sound field programs
■ Adjusting the parameters of this unit
• Automatically optimizing the speaker
parameters for your listening room
(AUTO SETUP)
• Manually adjusting various parameters of
this unit
• Setting the remote control
• Adjusting the advanced parameters ☞ P. 63
■ Additional features
Automatically turning off this unit
☞ P. 27
☞ P. 30
☞ P. 32
☞ P. 42
☞ P. 44
☞ P. 46
☞ P. 37
☞ P. 40
☞ P. 39
☞ P. 23
☞ P. 48
☞ P. 60
☞ P. 36