Download Print this page

Yamaha DSP-AX463 Owner's Manual: Using Audio Features; Enjoying High Quality Sound; Adjusting The Tonal Quality; Adjusting The Speaker Level

Yamaha av amplifier owner's manual.
Hide thumbs

Advertisement

USING AUDIO FEATURES

Enjoying high quality sound
Use the DIRECT mode to enjoy the high quality sounds of
the selected source. When the DIRECT mode is activated,
this unit plays back the selected source with the least
circuitry.
Press IDIRECT (or press 4 AMP and then
C DIRECT) to select
"
Notes
• "TONE CONTROL" and "SOUND MENU" (see page 50)
settings (except for speaker level settings) are not effective.
• The front panel display automatically dims.
y
While DIRECT mode is activated, the front panel display turns on
momentarily when an operation is performed.
Adjusting the tonal quality
Use this feature to adjust the balance of bass and treble for
the front left and right speaker channels.
y
Speaker and headphone adjustments are stored independently.
Press F TONE CONTROL repeatedly to
1
select the high-frequency response
(TREBLE) or the low-frequency response
(BASS).
Press G PROGRAM l / h repeatedly to
2
adjust the high-frequency response
(TREBLE) or the low-frequency response
(BASS).
Notes
• If you increase or decrease the high-frequency or the low-
frequency sound to an extreme level, the tonal quality of the
surround speakers may not match.
• TONE CONTROL is not effective when this unit is in the
DIRECT mode, or when MULTI CH is selected as the input
source.
40
En
Using audio features
"
DIRECT
.
Adjusting the speaker level
You can adjust the output level of each speaker while
listening to a music source. This is also possible when
playing sources input at the MULTI CH INPUT jacks.
Note
This operation will override the level adjustments made in
"AUTO SETUP" (see page 23) and "SP LEVEL" (see page 52).
Press 4 AMP and then press 6 LEVEL on
1
the remote control and then 7 k / n to select
the speaker you want to adjust.
Display
FRONT L
Front left speaker
FRONT R
Front right speaker
CENTER
Center speaker
SWFR
Subwoofer
SUR. L
Surround left speaker
SUR. R
Surround right speaker
y
• The available speaker channels differ depending on the
setting of the speakers.
• When the video monitor is turned on, the "SPEAKER
LEVEL" adjustment menu appears in the video monitor.
2
Press 7 l / h to adjust the speaker output
level.
• Press 7 h to increase the value.
• Press 7 l to decrease the value.
• Control range: –10 dB to +10 dB
Press 6 LEVEL to turn off the speaker level
3
adjustment display.
Adjusted speaker

Advertisement

   Also See for Yamaha DSP-AX463

   Related Manuals for Yamaha DSP-AX463

This manual also for:

Dsp-ax563

Comments to this Manuals

Symbols: 0
Latest comments: