Download Print this page

Yamaha DSP-AX3200 Owner's Manual

Yamaha av amplifier owner's manual.
Hide thumbs

Advertisement

GB
DSP-AX3200
AV AMPLIFIER
AMPLIFICATEUR AUDIO-VIDEO
OWNER'S MANUAL
MODE D'EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING

Advertisement

   Also See for Yamaha DSP-AX3200

   Related Manuals for Yamaha DSP-AX3200

   Summary of Contents for Yamaha DSP-AX3200

  • Page 1

    DSP-AX3200 AV AMPLIFIER AMPLIFICATEUR AUDIO-VIDEO OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING...

  • Page 2

    Using this unit with a higher voltage than specified is dangerous and may cause fire, damage to this unit, and/or personal injury. YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than specified.

  • Page 3: Table Of Contents

    INTRODUCTION INTRODUCTION CONTENTS ... 1 FEATURES ... 2 GETTING STARTED ... 3 Checking the Package Contents ... 3 Installing Batteries in the Remote Control ... 3 CONTROLS AND FUNCTIONS ... 4 Front Panel ... 4 Remote Control ... 6 Using the Remote Control ... 7 Front Panel Display ...

  • Page 4: Features

    N Dolby Pro Logic/Dolby Pro Logic N Dolby Digital/Dolby Digital Matrix 6.1 Decoder N DTS/DTS ES (Matrix 6.1, Discrete 6.1)/DTS Neo: 6 Decoder N CINEMA DSP: Combination of YAMAHA DSP Technology and Dolby Pro Logic, Dolby Digital or DTS N Virtual CINEMA DSP N SILENT CINEMA DSP •...

  • Page 5: Getting Started

    Checking the Package Contents Check your package to make sure it has the following items. Remote control MACRO TRANSMIT RE-NAME CLEAR LEARN MACRO SYSTEM POWER STANDBY PHONO V-AUX TUNER MD/TAPE CD-R D-TV/LD CBL/SAT VCR 1 VCR2/DVR 6CH INPUT TITLE ENTER SOURCE DISPLAY MENU...

  • Page 6: Controls And Functions

    CONTROLS AND FUNCTIONS Front Panel NATURAL SOUND AMPLIFIER STANDBY SPEAKERS SILENT BASS PROCESSOR EXTENSION DIRECT PHONES 7 8 9 STANDBY/ON Turns on and sets this unit in the standby mode. When you turn on this unit, you will hear a click and there will be a 4 to 5-second delay before this unit can reproduce sound.

  • Page 7

    BASS Adjusts the low-frequency response for the left and right main channels. Turn the control to the right to increase or to the left to decrease the low-frequency response. TREBLE Adjusts the high-frequency response for the left and right main channels. Turn the control to the right to increase or to the left to decrease the high-frequency response.

  • Page 8: Remote Control

    CONTROLS AND FUNCTIONS Remote Control This section describes the controls and their functions of the remote control. See “REMOTE CONTROL FEATURES” on pages 37 to 49 for operating other components with this remote control. TRANSMIT RE-NAME CLEAR LEARN MACRO SYSTEM POWER STANDBY V-AUX...

  • Page 9: Using The Remote Control

    i MACRO Used to program a series of operations for control by a single button (see pages 40 to 42). o MACRO ON/OFF Turns the macro function on and off. p Å and ı Switch the control area for the extra components that are not connected to this unit without changing the input.

  • Page 10: Front Panel Display

    CONTROLS AND FUNCTIONS Front Panel Display V AUX VCR2/DVR DTS Neo VIRTUAL MOVIE THEATER DISCRETE DIGITAL SILENT PRO LOGIC 1 Processor indicators When any function of , DTS, DISCRETE, VIRTUAL, g, , and activated, its indicator lights up. Input source indicator Shows the current input source with a cursor.

  • Page 11: Rear Panel

    Rear Panel DIGITAL OUTPUT AUDIO AUDIO S VIDEO OPTICAL IN (PLAY) TAPE MD/TAPE OUT (REC) D-TV CD-R /SAT IN (PLAY) CD-R OUT (REC) CD-R VCR 1 PHONO D-TV VCR 2 /DVR MAIN SURROUND TUNER /SAT COAXIAL MONITOR CENTER S VIDEO WOOFER 6CH INPUT DIGITAL INPUT...

  • Page 12: Preparation

    LFE (low-frequency effect) channel with high fidelity when the Dolby Digital signal or the DTS signal is played back. The YAMAHA Active Servo Processing Subwoofer System is ideal for natural and lively bass reproduction. SPEAKER SETUP...

  • Page 13: Connecting The Speakers

    Connecting the Speakers Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.

  • Page 14

    The diagram above shows the speaker layout in the listening room. I SUBWOOFER jack When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. Low bass signals distributed from the main, center and/or rear channels are directed to this jack if they are assigned to this jack.

  • Page 15: Impedance Selector Switch

    I IMPEDANCE SELECTOR switch WARNING Do not change the IMPEDANCE SELECTOR switch setting while the power of this unit is on, otherwise this unit may be damaged. If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the IMPEDANCE SELECTOR switch may not be fully slid to either position.

  • Page 16: Connections

    • When you connect other YAMAHA audio components (such as a tape deck, MD recorder and CD player or changer), connect them to the jack with the same number labels as !, #, $ etc. YAMAHA applies this labeling system to all its products.

  • Page 17

    OPTICAL OUTPUT AUDIO TV/digital TV or OUTPUT LD player S VIDEO OUTPUT INPUT demodulator S VIDEO OUTPUT AUDIO OUTPUT Satellite tuner COAXIAL OUTPUT indicates signal direction indicates left analog cables indicates right analog cables indicates optical cables indicates coaxial cables indicates video cables indicates S-video cables OUTPUT...

  • Page 18: Connecting Audio Components

    CONNECTIONS Connecting Audio Components I Connecting to digital jacks This unit has digital jacks for direct transmission of digital signals through either coaxial or fiber optic cables. You can use the digital jacks to input PCM, Dolby Digital and DTS bitstreams. When you connect components to both the COAXIAL and OPTICAL jacks, priority is given to the input signals from the COAXIAL jack.

  • Page 19

    OPTICAL INPUT MD recorder or tape deck INPUT OPTICAL OUTPUT OUTPUT CD player COAXIAL OUTPUT (Europe model) OUTPUT Turntable indicates signal direction indicates left analog cables indicates right analog cables indicates optical cables indicates coaxial cables OPTICAL INPUT OUTPUT OUTPUT DIGITAL OUTPUT AUDIO AUDIO...

  • Page 20: Connecting To An External Amplifier

    Center channel line output jack. SUBWOOFER jack When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System, connect the input jack of the subwoofer system to this jack. Low bass signals distributed from the main, center and/or rear channels are directed to this jack if they are assigned to this jack.

  • Page 21: Connecting The Power Supply Cords

    Connecting the Power Supply Cords AC OUTLETS SWITCHED 100W MAX. TOTAL IMPEDANCE SELECTOR SET BEFORE POWER ON REAR 6ΩMIN. /SPEAKER REAR CENTER : 6ΩMIN. /SPEAKER CENTER 4ΩMIN. /SPEAKER MAIN A OR B : 4ΩMIN. /SPEAKER A B : 8ΩMIN. /SPEAKER REAR 8ΩMIN.

  • Page 22: On-screen Display (osd)

    ON-SCREEN DISPLAY (OSD) You can display the operation information for this unit on a video monitor. If you display the SET MENU and DSP program parameter settings on a monitor, it is much easier to see the available options and parameters than it is by reading this information on the front panel display.

  • Page 23: Speaker Mode Settings

    SPEAKER MODE SETTINGS This unit has 6 SPEAKER SET items on the SET MENU that you must set according to the number of speakers in your configuration and their size. The following table summarizes these SPEAKER SET items, and shows the initial settings as well as other possible settings.

  • Page 24: Adjusting The Speaker Output Levels

    ADJUSTING THE SPEAKER OUTPUT LEVELS This section explains how to adjust the speaker output levels by using the test tone generator. When this adjustment is made, the output level heard at the listening position will be the same from each speaker. This is important for the best performance of the digital sound field processor, and various decoders (Dolby Digital, Dolby Pro Logic, Dolby Pro Logic , DTS, DTS ES, and...

  • Page 25

    LEFT RIGHT CENTER LEFT SURROUND RIGHT SURROUND REAR CENTER The state of the test tone output is also shown on the monitor by an image of the audio listening room. This is convenient for adjusting each speaker level. Front panel display also indicates from which speaker the test tone is output in the order of TEST LEFT¡TEST CENTER¡TEST RIGHT¡...

  • Page 26: Basic Playback

    NATURAL SOUND AV RECEIVER D I G I T A L STANDBY SPEAKERS NEXT – SET MENU SOURCE MD/TAPE D-TV/LD CD-R SILENT CBL/SAT TUNER VCR1 BASS PROCESSOR EXTENSION DIRECT VCR2 PHONO STEREO PROGRAM INPUT /DVR PHONES V-AUX – – EFFECT BASS TREBLE REC OUT...

  • Page 27

    Start playback or select a broadcast station on the source component. Refer to the operation instructions for the component. Adjust the volume to the desired output level. If desired, use BASS, TREBLE and BASS EXTENSION. These controls are only effective for sound from the main speakers.

  • Page 28: Input Modes And Indications

    BASIC PLAYBACK Input Modes and Indications This unit comes with various input jacks. You can set the priority of the input signal among different types of input signals. When you turn on the power of this unit, the input mode is set according to “8 INPUT MODE”...

  • Page 29: Selecting A Sound Field Program

    Selecting a Sound Field Program You can enhance your listening experience by selecting a DSP program. There are 11 programs with sub-programs available with this unit. However the selection depends on the input signal format and not all the sub-programs are possible for all input signal formats.

  • Page 30: Selecting Pro Logic

    BASIC PLAYBACK Selecting PRO LOGIC You can enjoy the 2-channel sources decoded into five or six discrete channels by selecting PRO LOGIC 6 in the program No. 11. NATURAL SOUND AV RECEIVER D I G I T A L STANDBY SPEAKERS NEXT –...

  • Page 31: Normal Stereo Reproduction

    AUTO: This mode automatically switches Dolby Digital Matrix 6.1/DTS ES Matrix 6.1/DTS ES Discrete 6.1 depending on the signal in the input source that this unit can detect. Rear center speaker does not work for 5.1 channel sources. Disc6.1: This mode can be selected only when the source with DTS ES Discrete format has been detected.

  • Page 32: Digital Sound Field Processing (dsp)

    The traditional stereo system that uses only two speakers is not capable of recreating a realistic sound field. YAMAHA’s DSP requires four effect speakers to recreate sound fields based on the measured sound field data. The processor controls the strength and delay time of the signals output from the four effect speakers to localize the virtual sound sources in a full circle around the listener.

  • Page 33

    Program JAZZ CLUB Village Gate The Bottom Line ROCK CONCERT The Roxy Theatre Arena ENTERTAINMENT Disco 6ch Stereo DIGITAL SOUND FIELD PROCESSING (DSP) Features This is the sound field at a jazz club in New York. It is in a basement and has a relatively spacious floor area.

  • Page 34: Cinema-dsp

    CINEMA-DSP is an upgraded version of YAMAHA DSP specially designed for movie soundtracks. CINEMA-DSP integrates the DTS, Dolby Digital, and Dolby Pro Logic surround sound technologies with YAMAHA DSP sound field programs to provide the surround sound field. It recreates the most complete movie sound design in your audio room. In CINEMA-DSP sound field programs, YAMAHA’s exclusive DSP processing is added to the right and left Main and...

  • Page 35

    (3 channels in front and 2 or 3 channels in rear). They also provide two modes; MOVIE/ CINEMA for movies and MUSIC for 2-channel source. These programs use YAMAHA’s tri-field DSP processing on each of the Dolby Digital or DTS signals for the front, left surround and right surround channels.

  • Page 36: Cinema-dsp Programs

    CINEMA-DSP CINEMA-DSP Programs I For movie programs: No. 9 to 11 According to the input signal format, this unit automatically chooses the appropriate decoder and DSP sound field pattern. Table of Program Names for Each Input Format Input 2 channel Stereo Program MOVIE...

  • Page 37

    The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in mind that most of these are precise digital recreations of actual acoustic environments. Note • Select the DSP program that you feel sounds best regardless of the name and description given for it below. Program MOVIE Spectacle...

  • Page 38: Basic Recording

    REC OUT allows you to record one source while watching and/or listening to another source. Recording adjustments and other operations are performed from the recording components. Refer to the operation instructions for these components. NATURAL SOUND AV RECEIVER D I G I T A L STANDBY SPEAKERS NEXT...

  • Page 39: Remote Control Features

    REMOTE CONTROL FEATURES The remote control can operate other A/V components of YAMAHA and other manufacturers as well as this unit. To control those components, you must set up remote control with the manufacturer codes. This remote control also has two sophisticated features: Learn and Macro. The Learn feature allows it to acquire functions from the remote controls of other components in your system (or other household appliances) equipped with an infrared remote control receiver.

  • Page 40: Setting The Manufacturer Code

    You will find the names of most worldwide audio- video manufacturers in alphabetical order in the display window. ENTER Manufacturer YAMAHA – If you want to change a library (component – category), press l / h. You can set a...

  • Page 41: Programming A New Remote Control Function (learn Feature)

    Programming a New Remote Control Function (Learn Feature) If you want to program functions not included in the basic operations covered by the manufacturer code, or a manufacturer code is not available, the following procedure needs to be performed. The possible programming area is the same as a component control area, so the buttons are programmable independently for each source component area.

  • Page 42: Using The Macro Feature

    POWER STANDBY *1 In order to turn on some components (including YAMAHA components) connected to this unit, connect those components to the AC OUTLETS on the rear panel. (Power control may not be synchronized with this unit depending on the component. For details, please refer to the operation instruction for the connected component.) *2 If the macro you select includes power control functions, the component may be turned off if it is already on when you press the macro button.

  • Page 43

    • A macro programming is used to transmit learning or setup (or YAMAHA preset) button signals of this remote control to a macro button. If necessary, set up the manufacturer code or program a function with the remote control for your component.

  • Page 44: Changing The Source Name In The Display Window

    REMOTE CONTROL FEATURES Press MACRO again when the operation sequence you want to program is complete. Note • “ERROR” appears in the display window under the following circumstances: – when pressing more than one button at once; or – when MACRO ON/OFF is switched to another position. Memory back-up If the remote control is without batteries for more than 3 minutes, or if exhausted batteries remain in the...

  • Page 45: Clearing A Learned Function Or Macro

    Press k / n to select the clear mode. The mode is shown in the display window in the following order: (L: name of a component) Clears all learned functions for the component area. Press the input selector button, Å or ı to select the component.

  • Page 46

    REMOTE CONTROL FEATURES Press MACRO to clear a programmed macro by using a ballpoint pen or similar object. MACRO Press and hold CLEAR by using a ballpoint pen or similar object, and at the same time press the button for which you want to clear the macro for about 3 seconds.

  • Page 47: Each Component Control Area

    Each Component Control Area The general operational buttons are shown for each area. Some of them may not function depending on the component you have. After setting the manufacturer code, press an input selector button, Å / ı, or SOURCE SELECT k / n to select a component you want to control.

  • Page 48

    REMOTE CONTROL FEATURES I Operating a TV/digital TV (D-TV/LD area) or a cable TV/satellite TV (CBL/ SAT area) DISPLAY POWER Enter TV INPUT TV VOL +/– TV MUTE * SEARCH, REC, STOP, PAUSE and PLAY function to operate your VCR without switching the input to VCR 1 if the manufacturer code is set in VCR 1.

  • Page 49

    I Operating a CD player (CD area) DISPLAY SEARCH POWER STOP INDEX * TV VOL +/–, TV INPUT, and TV MUTE function to operate your TV without switching the input if the manufacturer code is set in D-TV/LD or PHONO. When the manufacturer code for your TV is set up in the both D- TV/LD and PHONO areas, priority is given to the signal in the D-TV/LD area.

  • Page 50

    REMOTE CONTROL FEATURES I Operating a tape deck (MD/TAPE area) Display SEARCH (backward/forward) POWER Record STOP INDEX (MD only) * TV VOL +/–, TV INPUT, and TV MUTE function to operate your TV without switching the input if the manufacturer code is set in D-TV/LD or PHONO. When the manufacturer code for your TV is set up in the both D- TV/LD and PHONO areas, priority is given to the signal in the D-TV/LD area.

  • Page 51

    Å and ı, and the function for each button differs depending on the component. YAMAHA LD player is factory-set in Å and satellite tuner in ı. However if you want to set other component, set the manufacturer code for the component you want to set in the Å / ı button following the manufacturer code setting procedure described on page 38.

  • Page 52: Set Menu

    ADVANCED OPERATION The SET MENU consists of 14 items including the speaker mode setting, center graphic equalizer and parameter initialization features. Choose the appropriate item and adjust or select the values as necessary. • You can adjust the items on the SET MENU while playing a source.

  • Page 53: Speaker Set (speaker Mode Settings)

    Press –/+ repeatedly to change the setting of the item. Press k / n repeatedly until the current DSP program appears or simply press one of the DSP program group buttons to exit from the SET MENU. 10KEY HALL 1 ROCK CONCERT MOVIE...

  • Page 54

    SET MENU I 1B MAIN SP (main speaker mode) The OSD shows large or small main speakers depending on how you set this item. Choices: LARGE, SMALL Initial setting: LARGE LARGE Select this if you have large main speakers. The entire range of the left and right main channel signal is directed to the left and right main speakers.

  • Page 55

    I 1D REAR CT SP (rear center speaker mode) By adding a rear center speaker to your speaker configuration, this unit can provide more realistic front- to-back and transitions. Choices: LRG (large), SML (small), NONE Initial setting: LRG Select this if you have a large rear center speaker. The entire range of the rear center channel signal is directed to the rear center speaker.

  • Page 56: Low Frq Test

    SET MENU I 1F MAIN LEVEL (main level mode) Change this setting if you cannot match the output level of the center, rear (L/R) and rear center speakers with the main speakers because of the unusually high-efficiency performance of the main speakers. Choices: Normal, –10 dB Initial setting: Normal Normal...

  • Page 57: R Balance (balance Of The Left And Right Main Speakers)

    Adjust the volume of the subwoofer with the controls on the subwoofer so it matches that of the speaker you are comparing it to. I About the test tone The test tone is produced by the tone generator. The tone generator produces a narrow-band noise centered on a specified frequency by the band pass filter.

  • Page 58: Input Rename

    SET MENU 6 INPUT RENAME Use this feature to change the name of the input which appears on the OSD or the front panel display. Press an input selector button (or use INPUT l / h) to select the input you want to change the name of.

  • Page 59: Input Mode (initial Input Mode)

    I 7C OPTICAL IN for OPTICAL INPUT jacks (3) to (6) Choices: (3) CD, PHONO, VCR 2/DVR, VCR 1, CBL/SAT, D-TV/LD, DVD, MD/ TAPE, CD-R, TUNER (4) CD-R, CD, PHONO, VCR 2/DVR, VCR 1, CBL/SAT, D-TV/LD, DVD, MD/TAPE, TUNER (5) DVD, MD/TAPE, CD-R, CD, PHONO, VCR 2/DVR, VCR 1, CBL/ SAT, D-TV/LD, TUNER (6) D-TV/LD, DVD, MD/TAPE, CD-R,...

  • Page 60: Param. Ini (parameter Initialization)

    SET MENU 9 PARAM. INI (parameter initialization) Use this feature to initialize the parameters for each DSP program within a DSP program group. When you initialize a DSP program group, all of the parameter values within that group revert to their initial settings. Press the corresponding numeric button for the DSP program that you want to initialize.

  • Page 61: Range

    11 D-RANGE (dynamic range) Use this feature to adjust the dynamic range. This setting is effective only when this unit decodes Dolby Digital signals. Select the “MAX” setting for feature films. Select the “STD” (Standard) setting for general use. Select the “MIN” setting for listening to sources at extremely low volume levels.

  • Page 62: 13 Display Set

    SET MENU 13 DISPLAY SET I BLUE BACK Selecting AUTO for the on-screen display setting displays a blue background when there’s no video signal input. Nothing is displayed on the screen including the on- screen display if OFF is selected. Choices: AUTO, OFF Initial setting: AUTO I OSD SHIFT (OSD off-set position)

  • Page 63: Adjusting The Level Of The Effect Speakers

    ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS You can adjust the output level of each effect speaker (center, left and right rear, rear center and subwoofer) while listening to a music source. Adjustment should be made with the remote control. PRESET A/B/C/D/E TV INPUT...

  • Page 64: Sleep Timer

    Use this feature to automatically set this unit in the standby mode after the amount of time you have set. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off the external components connected to AC OUTLETS.

  • Page 65: Sound Field Program Parameter Editing

    In each program, these parameters are set with values precisely calculated by YAMAHA to create a sound field unique to the program. It is recommended to use DSP programs without changing the values of parameters; however, this unit also allows you to create your own sound fields.

  • Page 66: Changing Parameter Settings

    SOUND FIELD PROGRAM PARAMETER EDITING Changing Parameter Settings You can enjoy good quality sound with the factory-set parameters. Although you do not have to change the initial settings, you can change some of the parameters to better suit the input source or your listening room. Adjustments should be made with the remote control.

  • Page 67: Digital Sound Field Parameter Descriptions

    DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your listening room. Not all of the following parameters are found in every program. I INIT. DLY (Initial Delay) [P.

  • Page 68

    DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS I LIVENESS Function: This parameter adjusts the reflectivity of the virtual walls in the hall by changing the rate at which the early reflections decay. Description: The early reflections of a sound source decay much faster in a room with acoustically absorbent wall surfaces than in one which has highly reflective surfaces.

  • Page 69

    I REV. TIME (Reverberation Time) Function: This parameter adjusts the amount of time it takes for the dense, subsequent reverberation sound to decay by 60 dB (at 1 kHz). This changes the apparent size of the acoustic environment over an extremely wide range.

  • Page 70

    DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS For 6ch Stereo I CT LEVEL (Center Level) Function: These parameters adjust the volume level for each channel in 6-channel stereo mode. I RL LEVEL (Rear Left Level) Function: These parameters adjust the volume level for each channel in 6-channel stereo mode. I RR LEVEL (Rear Right Level) Function: These parameters adjust the volume level for each channel in 6-channel stereo mode.

  • Page 71: Troubleshooting

    Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit in the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center. I General...

  • Page 72

    TROUBLESHOOTING Problem The sound suddenly The protection circuit has been activated goes off. because of a short circuit, etc. The sleep timer has functioned. The sound is muted. Only the speaker on Incorrect cable connections. one side can be heard. Incorrect setting of “3 L/R BALANCE”...

  • Page 73

    Problem No sound from the rear “1D REAR CT SP” on the SET MENU is center speaker. set to NONE. 6.1/ES is not on. A “humming” sound Incorrect cable connections. can be heard. No connection from the turntable to the GND terminal.

  • Page 74

    TROUBLESHOOTING I Remote control Problem The remote control Wrong distance or angle. does not work nor function properly. Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. The batteries are weak. The manufacturer code has not been correctly set.

  • Page 75: Glossary

    Based on a wealth of actually measured data, YAMAHA CINEMA DSP uses YAMAHA original sound field technology to combine Dolby Pro Logic, Dolby Digital and DTS systems to provide the visual and audio experience of movie theater in the listening room of your own home.

  • Page 76

    GLOSSARY I Virtual CINEMA DSP YAMAHA has developed a virtual CINEMA DSP algorithm that allows you to enjoy DSP sound field surround effects even without any rear speakers by using virtual rear speakers. It is even possible to enjoy virtual CINEMA DSP in a minimum two-speaker system that does not include a center speaker.

  • Page 77: Specifications

    AUDIO SECTION • Minimum RMS Output Power for Main, Center, Rear 20 Hz to 20 kHz, 0.02% THD, 8 Ω ... 120 W • DIN Standard Output Power 1 kHz, 0.7% THD, 4 Ω ... 180 W • Dynamic Power (IHF) 8/6/4/2 Ω...

  • Page 78

    YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN Printed in Japan V817900 YAMAHA MUSIC AUSTRALIA PTY, LTD.

This manual also for:

Rx-v3200

Comments to this Manuals

Symbols: 0
Latest comments: