4. Configuration Methods
There are 2 basic methods for logging into the WizFi630S module and setting up the operating modes
and other configurable settings.
Web Manager: View and configure all settings easily through a web browser.
◼
Command Mode: There are a few methods for accessing Command Mode (CLI). making a
◼
SSH connection, or connecting a PC or other host running a terminal emulation program to
the unit's serial port.
4.1 Configuration using Web Manager
To use the Web Manager of WizFi630S, a network connection must be established between the PC and
the module. There are two ways to connect to the network.
Wireless: PC is connected to WizFi630S AP using Wi-Fi
◼
Wired: Connect the WizFi630S-EVB's Ethernet interface to the same network as your PC.
◼
After connecting between the devices, you can access the Web Manager using a standard web browser.
© Copyright 2019 WIZnet Co., Ltd. All rights reserved.
WizFi630S Manual
14