Table of Contents
Advertisement
network (the other router's LAN ports usually)
4.
connect again to the WizFi630S at its new address as assigned from dhcp server
Static address
1.
type uci set network.wan.proto='static' and press Enter
2.
type uci set network.wan.ipaddr='ip-address-here' and press Enter
3.
type uci set network.wan.netmask='subnet-mask-here' and press Enter
4.
type uci commit && service network restart (this will save the changes and restart network
interfaces)
5.
now you can connect the network cable from the device's WAN port to your existing network
(the other router's LAN ports usually)
6.
connect again to the device at its new address as defined above
5.1.3 Other Tabs
Wi-Fi devices need to modify Interface-> LAN in order to connect to WizFi630S as Wired.
Also, in order for WizFi630S to connect wirelessly to the existing network, you need to set Interface->
WWAN.
© Copyright 2019 WIZnet Co., Ltd. All rights reserved.
WizFi630S Manual
20
Advertisement
Table of Contents
