5.1.2 Command mode
to make the same we just did with Web Manager above, see below for more detailed explanation of the
steps.
You can show what is set using command below.
uci show network.wan
DHCP Client
1.
type uci set network.wan.proto='dhcp' and press Enter
2.
type uci commit && service network restart (this will save the changes and restart network
interfaces)
3.
now you can connect the network cable from the WizFi630S's WAN port to your existing
© Copyright 2019 WIZnet Co., Ltd. All rights reserved.
WizFi630S Manual
19