Demonstration And Test; Figure 4. Serial Terminal Program Configuration - Wiznet WIZ6000 User Manual

3. Demonstration and Test

In this chapter, an example is provided for you to test the functionality of WIZ6000. The testing
environments are the followings:
<Hardware>
A PC equipped with a RS-232 serial port
WIZ6000 Device Server
Connect PC and module's Ethernet port by using an Ethernet Cable
(Direct or Crossover)
Connect PC and module's serial port by using a serial cable
<Software>
Hyper Terminal (or any other terminal program)
Step 1.
① Connect the PC and WIZ6000 by using a serial cable.
② Connect the PC and WIZ6000 by using an Ethernet cable.
③ Turn on the power switch of WIZ6000.
Step 2. : WIZ610wi Environment Setup
① On your PC, go to the "Network Setting" and connect to your WIZ6000 in the "Wireless
Network Connection".
② In your web browser, input IP address of WIZ6000 (Default : 192.168.1.254).
If configuration page appears, click "Serial setup" menu and set the serial parameters.
Step 3. : Data Transmission
① Execute terminal program at the PC. (Ex: Hyper Terminal)
② Set the baud rate as the same value of WIZ6000.
WIZ6000 User's Manual

Figure 4. Serial Terminal Program configuration

(WIZnet Co., Ltd.)
8