5.2.2 Command mode
to make the same we just did with Web Manager above, see below for more detailed explanation of the
steps.
You can show what is set using command below.
uci show wireless.sta
uci show wireless.ap
Station Mode
1.
type uci set wireless.sta.disabled='0' and press Enter
2.
type uci set wireless.sta.ssid='ap-ssid-here' and press Enter
3.
type uci set wireless.sta.key='ap-password-here' and press Enter
4.
type uci set wireless.sta.encryption='encryption-type-here' and press Enter
5.
type uci commit && service network restart (this will save the changes and restart network
interfaces)
6.
now you can connect your WizFi630S to your Wi-Fi network
© Copyright 2019 WIZnet Co., Ltd. All rights reserved.
WizFi630S Manual
23