Wiznet WizFi630 User Manual

Hide thumbs Also See for WizFi630:

User manual (69 pages)

Manual (69 pages)

Serial command manual (39 pages)

Table Of Contents

Table of Contents

Quick Links

Download this manual

WizFi630 User Manual

(Version 1.1)

For more information, please visit our website at

http://www.wiznet.co.kr

Downloaded from

Elcodis.com

electronic components distributor

Table of Contents

Need help?

Do you have a question about the WizFi630 and is the answer not in the manual?

Questions and answers

Summary of Contents for Wiznet WizFi630

Page 1 WizFi630 User Manual (Version 1.1) © 2012 WIZnet Co., Ltd. All Rights Reserved. For more information, please visit our website at http://www.wiznet.co.kr © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 2 Certification Information CE for Class B ITE INFORMATION TO THE USER Hereby, WIZnet. Declares that this WizFi630 is in compliance with the essential requirements and other relevant provisions of directive 1999/5/EC and other relevant provisions of directive 1999/5/EC. WARNING: This is a class B product. In a domestic environment this product may cause radio...
Page 3 Release Change WizFi630’s picture at P10 Modify error sentence 2012-07-17 P6, P18,P19 : WIZ630wi WizFi630 P24 : DNS server DNS server address P38 : WDS © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 4: Table Of Contents
2.4.11. Site Survey ............................. 47 2.4.12. WI-FI Multi-Bridge settings ..................... 48 2.5. Serial to LAN(Wired and Wireless) ..................49 2.5.1. Main Connection settings ....................... 50 © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 5 2.7.6. System Status ..........................62 2.7.7. System Log ............................ 63 Hardware Information ............. 64 3.1. WizFi630 Pin Map ........................64 3.2. Dimensions ............................. 66 Important Notice ..............67 © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 6: Introduction
Therefore, WizFi630 can be the best solution for users who lack wireless network experience. WizFi630 follows the 802.11b/g/n standard and support up to 150Mbps speed in wireless interface. WizFi630 provides a test board, pc software, and documents so that anyone can develop a wireless solution.
Page 7: Features
WEP 64/128bit, WPA/WPA2-PSK TKIP, AES 802.1x (Only in AP mode) 802.11e and WMM (Wi-Fi Multimedia) Router and Firewall function supports Figure 1. Example of WizFi630’s Application © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 8: Wireless Specifications
802.11n(20MHz): 7,14.5,21.5,28.5,43.5,57.5,65,72Mbps 802.11n(40MHz): 29.5,86.5,115,130,144,150Mbps 11g: OFDM(64QAM, 16QAM, QPSK, BPSK) Modulation Type 11b: DSS(CCK, DQPSK, DBPSK) Antenna u.FL (EVB : 1T1R 2dBi) Table 1. Wi-Fi Specifications © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 9: Hardware Specifications
Input Power DC 3.3V / 1A Power Consumption Max : 3.3V / 600mA Dimension 33mm X 43mm X 4.5mm Weight Table 2. WizFi630 Module Specifications © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 10: Software Specifications
Event Logging Serial To Wi-Fi 2 Serial Port supports Table 3. SW Specifications 1.5. EVB Construction Contents 1.5.1. Section Qnt. Contents WizFi630 WizFi630 WizFi630-EVB WizFi630- © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 11 2dBi WI-FI Antenna (Model : W5I-B0-08) Antenna 1 ea Serial Cable Serial Cable 1 ea LAN Cable LAN Cable 1 ea DC 5V/2A Adapter Adapter Table 4. WizFi630-EVB Contents © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 13: Operation Mode And Description Of Menu
In this mode, all Ethernet ports and the wireless interface are bridged together. Wired/Wireless interface has the same IP address space with its top mesh. DHCP Server function is disabled and WizFi630 does not assign an IP. Wireless (LAN Port included) sending periodic Broadcast Packet to Station and maintains a connection with Station.
Page 14: Gateway
Wireless I/F is assigned as WAN Port and all Ethernet Ports are bound to LAN Port. Set the profile and the WizFi630 is automatically connected to the AP when re-booting in the future. Devices that are connected through the LAN port are assigned a private IP. WizFi630 periodically sends PING Packet to AP Gateway and maintains connection with AP.
Page 15: Ap-Client Mode
Wireless I/F is assigned as WAN Port and all Ethernet Ports are bound to LAN Port. This mode is similar to Station mode, however the difference is that the Wireless I/F will operate as client with AP simultaneously. WizFi630 periodically sends Broadcast Packet to Sub-LAN (LAN Port included) and maintains connection with Station.
Page 16: Menu List By Operation Mode
Config Mgmt Config Settings 2.7.3 Managements Port Mgmt Port Setting 2.7.4 Packet Statistics Packet Statistics 2.7.5 System Status System Status 2.7.6 System Log System Log 2.7.7 © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 17: Gateway (Router) Mode
Config Mgmt Config Settings 2.7.3 Managements Port Mgmt Port Setting 2.7.4 Packet Statistics Packet Statistics 2.7.5 System Status System Status 2.7.6 System Log System Log 2.7.7 © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 18: Client (Station) Mode
2.2.3. Client (Station) Mode WizFi630 works as a Wi-Fi client(station) which is always paired with a Wi-Fi AP. Users can take Client Mode as an opposite of Gateway Mode Menu Detailed Menu Description ( Link ) List Number Internet connection setting 2.3.1...
Page 19: Ap-Client Mode
One module can operate as both AP and Station. The wireless module connects to a different AP and functions as WAN port. The channel of WizFi630 must be identical to the channel of AP to be connected Support wireless bridge.
Page 21: Ad-Hoc Mode
Firmware 2.7.2 Firmware Mgmt Config Settings 2.7.3 Config Mgmt Managements Port Setting 2.7.4 Port Mgmt Packet Statistics 2.7.5 Packet Statistics System Status 2.7.6 System Status © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 23: Internet Setting
2.3. Internet Setting 2.3.1. Internet connection setting Select the internet service type and WizFi630 can connect to the internet If users would like access to Internet, Gateway Mode should be selected. Type Description Select the communication ways for Internet’s connection...
Page 24 -. User Name: Setting the User Name received from ISP -. Password: Password assigned by ISP -. Operation Mode: This mode is used for re-connecting when connection is bad © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com...
Page 25: Local Network Setting
2.3.2. Local network setting WizFi630 internal IP setting, DHCP server setting and DHCP. Type Description Enter the module’s IP. (Default Value : 192.168.16.254) IP Address Enter the module’s subnet mask. Subnet Mask MAC Address of module’s LAN port (Wireless included). (Read Only)
Page 26: Dhcp Client Information
Disable : VPN IPSec packet is not passed through WAN. (Default value) Enable : VPN PPTP packet is passed through WAN. PPTP Pass-through Disable : VPN PPTP packet is not passed through WAN. (Default value) © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 27: Static Routing Setting
If Range is NETWORK, enter subnet mask. Gateway Enter the gateway address to be passed when communicating with target. Interface Select whether the target is LAN or WAN. © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 28: Qos(802.1P) Setting
Settings for QoS / DLS in Station mode. Type Description Port #0 ~ Port#5 Set a QoS value from 0~7 Port #6(WLAN) Set a QoS value from 0~7 © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 29: Vlan(802.1P)
2.3.7. VLAN(802.1p) Settings for VLAN ID value and Tag/Untag. Type Description VLANID ID for connection with VLAN. Tagging Select to add information related to VLAN. © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 30: Wireless Setting
Use 40MHz as bandwidth in case connection with wireless station that supports 11n channel bonding.. Reverse Direction The wireless performance can be improved using Reverse Direct Grant, 11n’s RDG Grant(RDG) technology. © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 31 Setting for the other 20MHz area when channel bandwidth is set to 40MHz Setting for number of Tx antennas of 2T2R system. HT TxStream Setting for number of Rx antennas of 2T2R system. HT RxStream © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 32: Advanced Wireless Settings
The setting range is 1~2347. Fragmentation When a data is larger than the threshold size, it is fragmented and sent. Smaller © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com...
Page 33 Country Selects the country / regional code. Region Code B/G Protection Setting for better wireless communication when both 11b and 11g LAN cards are used. © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 34 Rx Antenna MPDU Aggregates multiple MPDU to a single MPDU. Aggregation MPDU density MPDU Variable Factor Aggregation MSDU Aggregates multiple MPDU to a single MPDU. (A-MSDU) © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 35: Wireless Security
Reject Listed: blocks communication with listed MAC client. Add a station MAC Enter the client’s MAC address for controlling. 2.4.3.1. Wireless Security setting Authentication settings © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 36 Use either character string or hex character when entering key. Select 1~4 for ‘Default Key.. Enter at least one WEP Key. The entered WEP key is used for connection from wireless terminal. © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 37 2.4.3.2.3. Wireless 802.1x authentication Enter the value for linking with the Radius Server. The values related to the Radius Server are provided by the internet service company. © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 38: Wds(Wireless Distribution System) Setting
Register the MAC of AP to be connected. Connect the registered MAC to the AP. Repeater Mode AP function is provided. (The performance of WDS is best in Repeater Mode.) © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 39: Wps Setting
Shows the default key ID used with WPS. WPS Key(ASCII) Shows the WPS Key. AP PIN Shows the PIN value used when connecting to station. WPS Mode Select PIN or PBC. © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 40 PBC Start Attempts connection with AP by virtually clicking the PBC button. Cancel Cancels the AP connection attempt. Renew PIN Renews the PIN value of WizFi630. © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 41: Wireless Network Status
2.4.6. Wireless network status The status of the station that is connected to WizFi630 is shown. The surrounding wireless AP’s status are shown. Type Description Channel Channel information of AP SSID SSID of AP BSSID MAC address of AP Security...
Page 42: Ap Wireless Statistics
Frames Receive Successfully Number of frames successfully received Frames Received With CRC Error Number of frames that failed due to CRC error Receiving signal strength © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 43 Number of frames received with CRC error. Frames Dropped Due To Out-of-Resources Number of frames dropped due to out of resources. Duplicate Frames Received Number of duplicate frames received. © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 44: Station Qos/Dls(Direct Link Setup) Configurations
Enable Power Saving function or not. Enable Direct Link function or not. Direct Link Setup In order to use Direct Link function, the AP connected to WizFi630 and the Station to be connected must support Direct Link function. MAC Address Enter the MAC Address of the station to be connected using direct link function.
Page 45: Profile
Authentication Authentication method of AP to be connected. Encryption Encryption method of AP to be connected. Network Type Select AP / ad-hoc. © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 46: Link Status
Channel Bandwidth. 20MHz or 40MHz. Guard Interval Long: 800nsec, Short: 400nsec STBC Supported only when value of MCS is 0-7. Shows link rate. Shows the receiving signal strength. © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 47: Site Survey
In: Infrastructure, Ad: ad-hoc Connected SSID of AP connected with WizFi630. Connect Connects with AP. Rescan Rescans for surrounding AP. Add Profile Adds to profile. © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 48: Wifi Multi-Bridge Settings
Channel of AP to be connected. (Channel) MAC Address MAC Address of AP to be connected. (optional) Security Select the same security option with AP to be connected. © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 49: Serial To Lan(Wired And Wireless)
Set the serial parameters for serial to wireless (Ethernet) function. Set two channels (Main connection, Aux connection) for each serial port Setting management of Serial #1 and #2 (Main connection, Aux connection) © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com...
Page 50: Main Connection Settings
Serial to LAN operation mode. ( Client Mode recommended) - Server : waits for connection. Mode - Client : connected to the remote server of WizFi630 - Mixed : not recommended Server IP Enter the IP address for WizFi630 setting.
Page 51: Packing Condition (Incoming Serial Data Packing Condition)
Type Description Status Enable or disable this option (Checked : Enable, Un-Check : Disable) Before sending data from Main port to serial port, WizFi630 added a TAG in the front of payload. Main Port For example: In-come LAN Data : “abcdegf”...
Page 52: Firewall Settings
DMZ Settings Disable/Enable DMZ DMZ IP Address Input the IP address that you would like to expose all of its unused ports to the Internet © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 53: Port Forwarding
2.6.2. Port forwarding When a computer on the internet sends data to the external IP address of the router (WizFi630), the router (WizFi630) needs to know what to do with the data. Port Forwarding simply tells the WizFi630 which computer on the local area network to send the data to. When you have port forwarding rules set up, your router takes the data off of the external IP address:port number and sends that data to an internal IP address:port number.
Page 54: Packet Filtering
2.6.3. Packet filtering WizFi630 can accept or block Internet packets according to pre-defined MAC or IP address First, please do the basic settings Type Description Source MAC Pre-defined source MAC address for MAC filtering function Dest IP Address Destination IP address...
Page 55: Contents Filtering
Host Filter function Block all the websites whose domain name contains the input text. Host Filter example, input “game”, websites like www.hangame.com, www.hangame.co.kr are blocked © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 56: System Security
2.6.5. System Security Defense from external attack. Type Description Remote management Settings about accessing methods from WAN to WizFi630’s embedded web server Telnet management Settings about accessing methods from WAN to WizFi630’s telnet Ping from WAN Filter Disable/Enable the WizFi630’s Ping response...
Page 58: Firmware
To use DynDNS, users should go to www.dyndns.org to create user name and domain name. And then, set related configurations by using WizFi630’s webpage. Similarly, to use freeDNS zoneedit, or no-ip,users should go to their homepage first to create user name and domain name.
Page 59: Config Settings
2.7.3. Config Settings Save the setting value of WizFi630 to the PC. Type Description Export Settings The setting files from the PC file are applied to the module. Import Settings The system’s setting information is saved as a file in the PC.
Page 60: Port Setting
Enable / Disable Port #1. Port #2 Enable / Disable Port #2. Port #3 Enable / Disable Port #3. Port #4 Enable / Disable Port #4. © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 61: Packet Statistics
Memory left System Free Memory Rx Packet Rx Packets counts Rx Byte Rx Bytes Counts Tx Packet Tx Packet Counts Tx Byte Tx Bytes Counts © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 62: System Status
System Up Time Shows the operation mode currently being used. Operation Mode Shows the internet configuration information Internet Configuration Shows the local network information. Local Network © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 63: System Log
2.7.7. System Log The operation history of WizFi630 can be checked by using System Log. If the system log exceeds 24Kbyte, more recent log record is added. © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 64: Hardware Information
LAN port 2 Link LED LINK_LED_1 LAN port 1 Link LED I/O, IPD GPIO0 WPS Button Push I, IPU CPURST_N I/O, IPD EJT_TDO Reset Button Push(GPIO17) © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 65 UART1 Tx/Rx LED I/O, IPD EJT_TCK WPS LED(GPIO20) I/O, IPD I2C_SCLK Serial Command Mode #2(GPIO2) I/O, IPD I2C_SD RUN LED(GPIO1) 3.3V 3.3V Table 1. WizFi630 Pin Map © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com electronic components distributor...
Page 67: Important Notice
WIZnet assumes no responsibilities or liabilities for the use of any of its products, conveys no license or title under any patent, copyright or mask work rights to these products, and makes no representations or warranties that these products are free from patent, copyright or mask work infringement, unless otherwise specified.
Page 68 - Increase the separation between the equipment and receiver. - Connect the equipment into an Outlet on a circuit different from that to which the receiver is connected. © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com...
Page 70 RF module in the user’s manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. © Copyright 2012 WIZnet Co., Ltd. All rights reserved. Downloaded from Elcodis.com...

Wiznet WizFi630 User Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Wiznet WizFi630

Summary of Contents for Wiznet WizFi630

Table of Contents