Menu Structure - Bender A-ISOMETER IR1570 Series Operating Manual

Operating and setting

5.2 Menu structure

Switchover to the menu mode
After pressing the MENU key, you can change from the standard mode to the
menu mode. From the menu mode you can link to the different sub menus.
Navigation within the menu
Select the desired menu item using the UP/DOWN keys. The selected menu
item is indicated by a flashing cursor. Press the ENTER key to open the associated
sub menu.
Use the UP/DOWN keys again to select the desired parameters. Move the
cursor to the edit field by pressing the ENTER key.
If you have reached the end of the main menu list, it will be indicated by the
"Arrow UP" symbol.
Changing the parameters
When password protection is activated, indicated by the symbol "padlock
closed" , the first thing to enter is the correct password before the parameters
can be changed using the UP/DOWN keys. Entering the correct password
once allows all parameters to be changed as long as you do not leave
the menu.
Changing the parameter usually has an immediate effect on the measuring
and alarm functions. The changed parameter is stored in a volatile memory
by pressing the ENTER key after returning to the sub menu (flashing cursor
in column 1). During menu operations, all measuring and alarm functions
carry on working as usual in the background.
Changing from the menu mode to the standard mode
Select the menu item "EXIT" and press the ENTER key to leave the respective
menu and to move to the next higher level. This is either the main menu or
the standard mode. If you stay in the main menu or a sub menu longer than
five minutes, the device will automatically switchover from the menu to the
standard mode.
24
TGH1370en/12.2019