Safety Information; Use For The Intended Purpose; Warranty And Liability - Bender A-ISOMETER IR1570 Series Operating Manual

1. Safety information

1.1 Use for the intended purpose

The A-ISOMETER® is intended for:
monitoring the insulation resistance of IT systems
 
Any other use, or any use which goes beyond the foregoing, is deemed to
be use other than for the intended purpose. The BENDER companies shall
not be liable for any losses or damage arising therefrom.
Use for the intended purpose also includes
compliance with all information in the operating instructions, and
 
compliance with test intervals.
 
As a basic principle, our "General conditions of Sale and Delivery" shall apply.
At the latest, these shall be available to the operator when the contract
is concluded.

1.2 Warranty and liability

Warranty and liability claims in cases of damage to persons and property
shall be excluded if they are attributable to one or more of the following
causes:
Use of the A-ISOMETER® other than for the intended purpose
 
Incorrect assembly or installation, commissioning, operation and mainte-
 
nance of the A-ISOMETER®.
Failure to comply with the information in the operating instructions regar-
 
ding transport, commissioning, operation and maintenance of the
A-ISOMETER®.
Unauthorized structural modifications to the A-ISOMETER®.
 
Failure to comply with the technical data
 
Improperly executed repairs, and the use spare parts or accessories which are
 
not recommended by the manufacturer.
Cases of disaster and force majeure
 
Assembly and installation with device combinations not recommended.
 
TGH1370en/12.2019
5