2. Click the "Equipments" and double-click "xw107" to select it. (If you have no XW-107,
click any slot and select "xboo_io: Boolean I/O for simulation")
Important Notice:
1.
"0" slot
2. For Remote I/O modules, you can use any slot and select the "Equipments" as
"bus7000".
Connecting Input:
To connect the Input attributed variables to "XW107", please click "DI8" and double click
the right side of channel "1". Then select the variable name that corresponds to the
channel, and click "Connect" button.
Getting Started: PAC-5007(P)/5107(P)/5207/5307 Ver. 1.0, 07/2010
1.
is reserved for I/O expansion boards
1.
3.
(XW-board)
2.
點選 "Next", 可變更接點位置.
2.
inside the controller.
3.
.
4-13
ICP DAS