ICP DAS USA ISaGRAF mPAC Series Getting Started page 26

EX: Using computer's COM5 to link to μPAC-5307. As shown below:
C1 B115200 P0 D8 S1
F
Xautoexec.bat Xisa5307.exe
w25
5. Switch the "Init*" to "ON" then power it up.
6. If the connection is OK, "uPAC-5001>" messages will appear on the screen.
Upgrade ISaGRAF Embedded Driver:
7. Press "F4"
"autoexec.bat", " isa5307.exe ", "5k090903.img"
** Please Wait about 60 SEC. to update ISaGRAF system and
DO NOT Remove the Power. **
8. When the system automatically reboot, you have completed the update.
Type "dir"
Getting Started: PAC-5007(P)/5107(P)/5207/5307 Ver. 1.0, 07/2010
3-6
to auto download the following files and reboot system.
to make sure "autoexec.bat" and "isa5307.exe" have been downloaded.
C5 B115200 P0 D8 S1
F
Xautoexec.bat Xisa5307.exe
w25
ICP DAS