ICP DAS USA ISaGRAF mPAC Series Getting Started page 19

Important Notice for Windows NT Users:
If your computer is using the "Windows NT" OS, you will need to add one line to the file
in the ISaGRAF Workbench folder.
You can use any ASCII based text editor to open the "isa.ini" file. Locate the [WS001]
header in the file (it should be at the top of the file). Anywhere within the [WS001]
header portion of the file, add the entry shown below.
[WS001]
NT=1
Isa=C:\ISAWIN
IsaExe=C:\ISAWIN\EXE
Group=Samples
IsaApl=C:\isawin\smp
IsaTmp=C:\ISAWIN\TMP
Important setting for using variable arrays:
Please add two more lines on the top of the
of variable arrays.
[DEBUG]
Arrays=1
Getting Started: PAC-5007(P)/5107(P)/5207/5307 Ver. 1.0, 07/2010
C:\isawin\exe\isa.ini
c:\isawin\exe\isa.ini file to enable the usage
. 2-3
ICP DAS