Link To I-7000 And I-87K Remote I/O Modules - ICP DAS USA ISaGRAF mPAC Series Getting Started

3.12 Link to I-7000 and I-87K Remote I/O Modules

μPAC-5x07(P) PAC system can use its COM2: RS-485 port to link to ICP DAS's "I-7000"
and "I-87K" series Remote I/O modules. This configuration can be very useful in
applications that require distributed Remote I/O throughout the system.
Note: You can link up to 64 pcs of I-7000 or I-87K series Remote I/O modules to one
μPAC-5x07(P) PAC.
You must remember to set each I-7000 and I-87K Remote I/O module a unique address
(NET-ID), and set them and the μPAC-5x07(P) PAC all have the same Baud rate &
checksum (All enabled or all disabled).
For more information regarding setting up and programming an I-7000 / I-87K remote
module, please refer to
ISaFRAF PACs"
Getting Started: PAC-5007(P)/5107(P)/5207/5307 Ver. 1.0, 07/2010
"Chapter 6: Link I-7000 and I-87XX Modules" of "User's Manual of
.
. 3-21
ICP DAS