After you click on "Setup" button, an "Ethernet Link Parameters" dialog box will appear.
Set the "Port Number" to "502" and enter the Internet address (IP) of your μPAC-5x07(P)
PAC. (Please refer to
Once you have entered the appropriate information, click on "OK" button, and now you
have configured your PC to communicate with the μPAC-5x07(P) through the Ethernet
port.
Multi-Clients Connection to μPAC-5x07(P)
Each μPAC-5x07(P) has an IP address and with a fixed Ethernet port No. 502. Up to 6 PCs
can link to one PAC throughout Ethernet (Modbus TCP/IP protocol). Another PC or MMI
can link to COM1: RS-232 port (Modbus RTU protocol). Therefore the maximum number
of clients can be linked is 7.
PC/HMI
PC/HMI
MMI
Getting Started: PAC-5007(P)/5107(P)/5207/5307 Ver. 1.0, 07/2010
3-4
)
Section 3.9
Modbus RTU
IP1
Modbus TCP/IP
μPAC-5x07(P)
IP2
ICP DAS