Changing The Amount Of Chorus - Yamaha QS300 Owner's Manual

24
3. With the Reverb "dial" highlighted, use the rotary dial to turn the
Reverb Send parameter down to about 0.
Play the Voice and hear the difference in the Reverb sound; notice how "dry"
it is. Note also that the dial setting in the display also changes to reflect the
new value.
4.
Now, use the rotary dial to turn Reverb Send up to about 110.
Play the Voice again and hear the difference in the Reverb sound.

Changing the Amount of Chorus

The Chorus effects of the QS300 modulate the sound, and are capable either of
adding subtle enhancement or creating wild, special effects.
Just as you did with Reverb above, try changing the Chorus Send setting. First
(from the display page in the last section), select Chorus Send with the cursor
keys.
Then set the value to about the halfway point or higher, using the rotary dial.
Finally, play the Voice again to hear how Chorus affects the sound.
Chorus Send.