Table of Contents
Advertisement
Song Chain
Song
s
^
Path:
(Chain)
By using the Song Chain function, you can specify a
sequence of up to 10 songs to play back automatically.
Each song within the chain can be repeated up to 99 times.
Operation ...........................................................................
From the main Song display, press ^ (Chain) to
1.
call up the Chain function.
The display shows the chain numbers from 1 to 10.
2.
Program the Chain.
To program a sequence of songs for playback, place the
cursor at the appropriate chain numbers and use any
data entry method to enter the required song numbers.
The number following the song name is the number of
times that song is to be repeated. Place the cursor at the
repeat number and use any data entry method to set the
number of repeats for each song.
Song number/name
In the example chain shown here, the first two songs in
the chain will play through in sequence, then the third
song will be repeated twice.
3.
Play the Chain.
While still in the Chain page above, press the R
button to play back the programmed chain. Playback
will stop after the last song. You can also press T
to stop playback at any time.
Number of repeats
Other Song Functions
You can also use loop playback to continuously "loop" or
repeat playback of the entire Song Chain. To do this,
simultaneously hold down the ( button and press the
R button (instead of step 3 above). Playback repeats
indefinitely until the playback is stopped manually by
pressing the T button.
Deleting Songs From the Chain
To delete a song from the chain and move all subsequent
songs up to fill the gap, place the cursor at the song to be
deleted and press @ (Delete).
Inserting New Songs In the Chain
To insert a new song in the middle of a chain and move all
subsequent songs down to make room, place the cursor at
the poing at which the song is to be inserted and press !
(Insert). You can then enter a new song number at the
insert point.
95
Advertisement
Table of Contents
