Table of Contents
Advertisement
NOTE: During Demo
Song playback, no panel
controls (with the excep-
tion of the ) button
and the VOLUME control)
can be used.
NOTE: If you wish to
playback all Demo Songs
continuously, use the
Song Chain function by
pressing ^ (Chain).
(See page 95 for details.)
CAUTION:
• Do not attempt to
eject the disk or
otherwise interrupt the
Auto Load operation
while it is in progress.
• Any User Voices
contained in memory
will be erased by the
Auto Load operation.
Make sure that any
necessary User
Voices have been
properly saved to disk
before using Auto
Load.
6.
Press the s button to return to the Song mode.
7.
Select the desired Demo Song number (highlight the Song number and
change the value), then press the R button to start playback of the
selected Song.
The Demo Song starts playing immediately and repeats indefinitely until
stopped (in step 8 below).
8.
To stop playback of the song, press the T button.
RECORD
TOP
To return to the Voice Play mode, press the v button.
Auto Load
The Auto Load function automatically loads the contents of a floppy disk to
internal memory when the power is turned on.
To use Auto Load: ...............................................................................................
With the power off, insert an appropriate disk into the disk drive, then turn on
the power of the QS300.
An "Auto Loading..." message appears in the display, along with a moving bar
graph that indicates the progress of the operation.
STOP
RUN
Playing the Demo Song
19
Advertisement
Table of Contents
