05: Transpose - Yamaha QS300 Owner's Manual

This operation transposes all notes in the specified part up
or down by the specified number of semitones.
Track
Range: 01 — 16, Chd (Chord track)
This determines the track to be affected by the Transpose
Job: sequencer tracks 1 - 16, or the accompaniment Chord
track (Chd).
Measure Range
Measure Range is actually four separate settings (as shown
below). These determine the range of the play data that is
to be affected.
First measure.
First beat.
Transpose
Range: -99 — +99 semitones
This determines the pitch transposition of the specified
data, up or down in semitone increments.
Press E to execute the Transpose Job. A "Com-
pleted" message appears briefly when the Job is done.
HINT: Of course, you can transpose all parts as required to
shift the entire song to a different key, but the Transpose Job is
actually more suited to changing the pitch of a section of a
single track. This can be done to produce key modulations
within a song, or to create harmony with another track.
146

05: Transpose

Track
Last measure.
Last beat.
Measure Range
Transpose