Table of Contents
Advertisement
NOTE: Recording an
Ending section to a Song
(or entering an End mark
in Step Recording, page
123) automatically stops
the Song at that point,
even when there is
recorded data past that
point on tracks 1 - 16.
7.
Change to other sections as the sequencer records. The selected section
starts playing at the start of the next measure.
During recording, move the highlight to the section parameter, and then
select the other sections. The Fill sections (AA, BB, AB and BA) are used
as one-measure transitions between the Main A and B sections. (The last
letter of the Fill section indicates which section is to follow, Main A or Main
B; for example, Main B automatically follows the Fill AB section.) The
Ending section, as its name suggests, plays one time and then automatically
stops the recording, ending the song.
Though you can use the D/I buttons or rotary dial to change sections,
the easiest method is to use the numeric keypad. While the section param-
eter is highlighted, simply press the appropriate button (as shown below) to
change to the desired section.
3
Intro
Main A
Fill AA
Fill AB
8.
To end the song, select the Ending section, or press T.
The Mute dot in the display for the Pattern track is now solid, indicating that
the track has recorded data.
Note that the sequencer also returns to the first measure (or "top") of the
song, so that you can immediately play it back from the beginning, or record
additional tracks.
9.
To play back what you've recorded, press R.
3
3
7
8
9
INTRO
ENDING
4
5
6
MAIN A
MAIN B
1
2
3
FILL AA
FILL BB
0
—
ENTER
FILL AB
FILL BA
Solid Mute dot indicates that the
track contains data.
Recording a Song
Ending
Main B
Fill BB
Fill BA
35
Advertisement
Table of Contents
