Editing A Voice; Changing The Amount Of Reverb - Yamaha QS300 Owner's Manual

Editing a Voice

This short section introduces you to some of the Voice editing functions of the
QS300. These allow you to change the sound of a Voice, or "customize" it for
your own purposes.
The QS300 packs a huge variety of editable settings (also referred to as "param-
eters"). This section explores but a few of them. In this section you'll learn
how to:
• Change the amount of Reverb and Chorus applied to the Voice.
• Change the Variation effect type.
• Set the amount of Pitch Bend.
• Compare the newly edited Voice with the original.
• Change the Envelope Generator setting (the shape of the sound in time).
• Store the newly created Voice for future recall.

Changing the Amount of Reverb

Built into the QS300 are three separate effect sections: Reverb, Chorus and
Variation. Here, you'll learn how to change the amount of Reverb that is applied
to the Voice.
From the Voice mode display, press the e button.
1.
If the display above is not shown, press ! (Overall) to select the Overall
page above.
2. From this page, select the Reverb Send "dial" — use the cursor buttons
to move around in the display.
Changing the Voice Bank / Editing a Voice
Selected parameter name and value.
Reverb Send "dial."
23