Table of Contents
Advertisement
Song Multi
s
$
Path:
* Pressing this may not be necessary if the appropriate page has already been called up.
Dry Level
Range: 0 — 127
This determines the level of the direct or unprocessed
sound for the individual channel/track. Use this to adjust
the "dry/wet" balance of the direct signal and the effect-
processed signal. The Dry Level parameter can be set only
when Variation Mode (below) is set to System. When
Variation Mode is set to Insertion, this value is fixed for all
channels at 127.
Reverb Send
Range: 0 — 127
This determines the level of the Voice (for the individual
channel/track) that is sent to the Reverb effect.
Chorus Send
Range: 0 — 127
This determines the level of the Voice (for the individual
channel/track) that is sent to the Chorus effect.
76
Send
*@
(Multi)
(Effect)
When Variation Mode is set to Insertion:
When Variation Mode is set to System:
Variation Mode
*^
(Send)
Variation Mode
Settings: Insertion (Ins), System (Sys)
This determines how the Variation effect is connected in the
signal chain. When set to Ins (Insertion), the Variation
effect is applied to only one of the channels. When set to
Sys (System), the Variation effect is applied to all channels,
according to the amount of Variation Send (below) set for
each channel.
Variation Send
Range: Insertion mode: off, on
System mode: 0 — 127
This determines the level of the Voice (for the individual
channel/track) that is sent to the Variation effect. When
Variation Mode (above) is set to Insertion, this can only be
turned off or on (the dials do not appear in the display).
Also, it can only be applied to a single channel/track.
When Variation Mode is set to System, the dials appear in
the display and the Send amount can be set from 0 — 127.
Dry Level
Channel/Track
Reverb Send
Chorus Send
Variation Send
Advertisement
Table of Contents
