Table of Contents
Advertisement
Load Operation
Disk
d
@
Path:
(Load)
The Load operation allows you to retrieve files on floppy
disk and load them to the QS300 so that you can play/use
them. Select the desired data type from the above display
(by any data entry method), and press E.
The Voice data type (number 7) has a different loading
procedure than the other data types (covered in the instruc-
tions that follow). See Loading a Voice below for details.
There is also an Auto Load function which automatically
loads the contents of a floppy disk to internal memory
when the power is turned on. (For details, see page 19.)
Number of files
(on disk).
Source data.
198
Size of selected
file (in kilobytes).
Destination location.
To use the Load operation: ..................................................
1.
From the above display, select the specific data file
you wish to load.
Do this by highlighting the desired number/title in the
left (source data) box, or select the number of the data
directly.
2.
Select the destination location (right box).
(Note: This step is unnecessary for the All Data and All
User Voice types.)
Press E.
3.
If the destination location already contains data, a "Are
you sure?" prompt appears in the display.
Answer the prompt by pressing the I button to go ahead
with the Load operation, or pressing D to cancel.
After the operation is completed, press ) to return to
the previous mode display, or press any of the MODE
buttons.
NOTE: You can use the ) button to leave the Load display
at any time except while the operation is actually in progress.
Advertisement
Table of Contents
