Delete Operation - Yamaha QS300 Owner's Manual

Delete Operation

Disk
d #
Path: (Delete)
The Delete operation completely erases the specified file
from the current disk. Select the desired data type from the
above display (by any data entry method), and press
E.
IMPORTANT: The disk write-protect slide must be in the write-
enable position to perform a Delete operation. If it is not, the
"Write Protected!" error message will appear when you attempt
to execute the Delete operation.
Number of files
(on disk).
Files (Selected file will be
deleted.)
To use the Delete operation: ................................................
1.
From the above display, select the specific data file
you wish to delete.
Do this by highlighting the desired number/title in the
left (source data) box, or select the number of the data
directly.
Press E.
2.
An "Are you sure?" prompt appears in the display.
200
Answer the prompt by pressing the I button to go ahead
with the Delete operation, or pressing D to cancel.
After the operation is completed, press ) to return to
the previous mode display, or press any of the MODE
buttons.
NOTE: You can use the ) button to leave the Delete
display at any time except while the operation is actually in
progress.
Size of selected
file (in kilobytes).