Table of Contents
Advertisement
Disk
No Disk
Illegal Format Disk
Bad Disk
File Not Found
Write Protected
Disk Full
Illegal File Type
Can't Change File Name
System
Memory Full
Voice Memory Full
There is no disk in the disk drive. Insert a proper disk and attempt the operation again.
The inserted floppy disk is not of the proper format. Insert a disk of the appropriate
format, or format the disk (page 202).
The floppy disk is damaged or dirty and cannot be read. Clean the disk surface if
possible, and try cleaning the disk drive itself, then attempt the operation again.
Unable to find the specified file. Try specifying a different file name, or insert a disk
containing the proper file name.
Cannot write to the disk because the write-protect tab is set to the "protect" position.
Set the tab to the "write" position and attempt the operation again.
Cannot write additional data to the disk, because the disk's data capacity or director
capacity has been exceeded. Delete unnecessary files from the disk and attempt the
operation again, or use another blank disk.
Attempted to read a file type not supported by the QS300. (The QS300 supports SMF
and ESEQ files only.)
Attempted to change an existing file name.
The sequencer's memory is full and no more data can be recorded. Also, no related
jobs can be executed. If possible, delete unneeded data from the Song and try record-
ing again.
The User Voice memory is full and no more data can be stored. Save the desired User
Voice data to floppy disk (page 197), and delete that User Voice data from internal
memory, then attempt the operation again.
Warning and Error Messages
207
Advertisement
Table of Contents
