Tuning/Filter - Yamaha QS300 Owner's Manual

Song Multi
s $
Path:
* Pressing this may not be necessary if the appropriate page has already been called up.
Note Shift (Shift)
Range: -24 — +24 semitones (+/- 2 octaves)
This determines the coarse pitch setting for the selected
channel's Voice in semitones. (Fine pitch adjustments can
be made in Detune below.)
Detune
Range: -100 — +99 (at 440 Hz: -10 — +9.9 Hz)
This determines the fine pitch setting for the selected
channel's Voice. (Coarse pitch adjustments can be made in
Note Shift above.)
Filter Cutoff Frequency (Cutoff)
Range: -64 — +63
This determines the cutoff frequency of the low pass filter,
or the frequency point above which other frequencies are
filtered out. Lower cutoff values create a deeper, more
rounded tone, while higher values create a thinner, brighter
tone.
Low (-64) Cutoff
Frequency
82

Tuning/Filter

*@
(Multi) (Inst)
High (+63)
*%
(Tun/Fl)
Filter Resonance (Resonance)
Range: -64 — +63
This determines the amount of filter resonance or emphasis
of the Filter Cutoff Frequency parameter above. Higher
values increase the emphasis of the Cutoff Frequency,
producing a higher resonant peak, while lower values
produce a relatively flat response.
Note Shift
Channel/Track
Detune
Filter Cutoff Frequency
Resonance