Table of Contents
Advertisement
Basic TENORI-ON Operation: Function Buttons
Functions
By holding one of the ten function buttons located on either side of
the TENORI-ON and operating the LED buttons you can change voices,
change octaves, and apply a variety of effects and variations to your
performance.
This unique visual/tactile interface has been specifically designed to
allow intuitive, instantaneous operation of a variety of functions.
Operate the LED buttons while holding a function
button.
08
Changing Voices
L1
+ LED Buttons:
You can select any voice from the 256 voices available in one quick
operation. When you press and hold the [L1] button vertical and
horizontal lines will light on the matrix, and the button at their intersection
corresponds to the currently selected voice. If you press a different LED
button while these crossed lines are showing the intersection will move to
that button and the corresponding voice will be selected.
Matrix with voice number 06/10 selected.
16
16/01
15
14
13
12
11
10
09
08
07
06
05
04
0 3
03
02
01
01/01
01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
Instrument
Voice Number
Layer[01]
(Vertical Position/
06/10:LowBoom
Horizontal Position)
The voice number and name will appear in the LCD display. The voice number corresponds
=
to the vertical and horizontal button numbers.
The TENORI-ON has 253 internal voices. The remaining three voices (numbers <01/16>,
=
<02/16>, and <03/16>) are "user voices" that can be created by you and loaded into the
TENORI-ON via an SD Memory Card (page 23).
16/16
06/10
User Voices
01/16
∞
Voice Name
Advertisement
Table of Contents
