Setting The Last Rec In & Out Points - Yamaha D24 Owner's Manual

71
Setting the LAST REC IN & OUT Points
Setting the LAST REC IN & OUT Points
The LAST REC IN and OUT points are set automatically when you manually punch in
and out of recording or rehearsal. They can also be set using the [SET] and LAST REC
[IN] and [OUT] buttons while the D24 is stopped or during rewind, fast forward, play-
back, recording, or rehearsal. When the LAST REC IN or OUT point is set, the corre-
sponding indicator (IN or OUT) lights up.
While holding down the [SET] button, press the [IN] button to set the IN
1
point, or the [OUT] button to set the OUT point.
LAST REC IN LAST REC OUT
point point
SET SET OUT
IN
The LAST REC IN and OUT points are set with sub-frame accuracy.
The LAST REC IN and OUT points can be located using the LAST REC [IN] and
[OUT] buttons respectively. See "Locating the LAST REC IN & OUT Points" on page
62 for more information.
To set the LAST REC IN or OUT point to an A or B point, first locate the A or B point,
see "Using the A & B Points" on page 61, and then set as explained above.
To set the LAST REC IN or OUT point to one of the 99 locate memories, first recall the
locate memory, see "Recalling Locate Points" on page 66, and then set as explained
above.
The LAST REC IN and OUT points for each project are saved to disk automatically.
D24—Owner's Manual