Searching For Projects; Project Search Confirmation; Project Search Confirmation - Yamaha D24 Owner's Manual

58
Chapter 6—Quick Locate

Searching for Projects

Projects can be selected using the PROJECT SEARCH buttons.
Press the [
1
project. Press the button again to locate the top of the previous project.
Press the [
2
If the [
selected, "nn NEW PROJ" appears on the display. See "Recording" on page 33 for more
information.
Project Search Confirmation
The Project Search Confirmation function is used to prevent accidental project selec-
tion with the PROJECT SEARCH buttons. When set to ON, the message "ARE YOU
SURE" appears when a different project is selected by using the PROJECT SEARCH
buttons, and you must press the [ENTER] button to confirm your selection.
Project search confirmation is turned on or off using the P SERCH CNFM function.
Press the [UTILITY] button.
1
The UTILITY indicator lights up.
Use the JOG/DATA dial to select "P SERCH CNFM," and then press the [ENTER]
2
button.
The current setting appears on the display.
Use the JOG/DATA dial to select either "OFF" or "ON."
3
The default setting is OFF.
Press the [ENTER] button to activate your selection, or the [CANCEL] button
4
to cancel the P SERCH CNFM function.
Press the [UTILITY] button again to leave utility.
5
The UTILITY indicator goes out.
D24—Owner's Manual
] PROJECT SEARCH button to locate the top of the current
Current
position
01 PROJECT 02 PROJECT
] PROJECT SEARCH button to locate the top of the next project.
Current
position
01 PROJECT 02 PROJECT
] PROJECT SEARCH button is pressed while the last recorded project is
03 PROJECT 04 PROJECT
03 PROJECT 04 PROJECT